Search results

I had my 3 point hitch repaired at my local Kubota dealer. Everything was originally working at the time I removed the control I have change all the oil and cleaned all filters. The reason for the repair was leaks on the control arms that exit the body. New o rings where installed and the leaver...

Hi folks, I'm working on a seal leak on the hydraulic cylinder for the steering of my B7200. Does anyone out there have a parts breakdown. I don't see it anywhere in my parts manual. Any help would be greatly appreciated.

Hi folks; I just installed a new oil pressure sensor (electrical) on my B7200. At the same time I changed the oil. I also added some HE Lucas oil treatment as this engine is about 35 years old. I checked on line and confirmed with the Lucas bottle that says to add 20% Lucas to your oil. I...

Does anyone know of a Boom Pole for sale, new or used in Ontario? Looking for a cat 1 fit

Just a quick question to all you long time OUT folks. I have owned an B7200 HST D for about 4 years now. Over the 4 or so years, I have enjoyed browsing the OTT and have experienced the wealth of knowledge out there amongst the members. Here's my question; as I browse the forum , I don't see a...

I'm preparing to do some repairs on my control as I have some leaks around the control levers and I need to replace some o rings. I'm looking at the diagram and wondering if anyone else has had to remove the cover to expose them. With everything that is connected inside, it looks a little...

Good afternoon, hope someone out there can help me with my old but trusty B7200. I have a leak in my hydraulic system that I have pinned down to the control valve. From my parts breakdown the leak is coming out around item 340, THE SHAFT CONTROL LEVER right where I comes out of the # 020 cover...

Wolfman; in one of your threads you mentioned having a newer version of the starter would crank the engine of my B7200 over much faster and I would not have the need for the decompression lever. I've attached a photo of the existing starter hoping you can identify old or new. By the looks of the...

Hi folks; my HST treddle and linkage is a little sloppy which i have tried to adjust and does not always return to the neutral. So I would like to replace some of the worn links and bushings. I see this is a very tight spot to work in. I'm wondering if you have to split the tractor to accomplish...

I'm looking for some advice for my front mount B2551 snowblower, operating on a B7200HST tractor. My problem is with the outer and inner sleeve of the PTO I had to replace the outer sleeve. The original sleeves being on an 1985 tractor where steel sleeves. When I ordered a replacement sleeve, I...

I'm fairly new to diesel engines so starting in the -20 c is a little tough with my B7200. I use my glo plugs for a 60 count, decompression for a five count and it usually starts. My question is how long can you safely leave the key on engaging the starter.

B7200HST; 1985 vintage. So my question relates to the hydraulic oil level markings on tractors dip stick (photo attached). As you can see in the photo, there is only one mark. My manual shows a dip stick with two levels like normal a min and max. I'm assuming the one mark is the high level. Does...

Time for the snow blower; I'm running a B7200HST with a 2 speed mid PTO driving a B2551 snow blower. My PTO is rated at 1546 and 2455 with engine RPM of 2500. My question is, what speed do you operate the mid PTO, high or low. The reduction on the input ahead of the reducer is 40:1. With that...

B7200HST with a D950 engine 1985 vintage. Does anyone know what the voltage should be from each glo plug to ground? The three plugs are parallel to each other and in series with the glo plug indicator. I wanted to remove the plugs for inspection but with this model and age, it appears you have...

So my B7200HST came with a front snow blower. While assembling the unit for the first time, I found that the drive shaft was a bit loose fitting onto the mid PTO shaft. This part of the shaft is bolted onto the PTO shaft and the other end that is slide on, is a much better fit. At low RPM, I get...

New to Orange T.T. I have recently bought B7200HST that came with an operator's manual and I have the WSM. The tractor came with a B2551 snow blower with the hydraulics connected into an Auxiliary Block. My problem is the block on the tractor is different then the manual. The manual shows a...