Search results

Thanks for the thought. Yes, checked the linkage. All seems to be working as it should. The mystery goes on!

Actually, neither. There did not appear to be any thread seal on the old one, so did not apply on the new connection. I am guessing you are recommending the hydraulic sealant rather than the Teflon tape? Many thanks for your input.

And the Power Steering and GST are working fine.

Thanks to Dave and Tornado for your observations. The oil/filter change process was straightforward, as described by Tornado. No adjustments to anything. Around the same time, I changed one of the short hoses to the loader, but did not disconnect any hoses directly at the loader valve. Loader...

No draft lever on Tractor. Still have same issues with 3 point raising. As the 3 point is not working, when I use tractor, I put 3 point hitch lever into raised position, lift the hitch by hand and lock into the upper retaining hook. When I park tractor and release from upper hook, it stays up...

Thanks for response. Fluid level is close to top of sight glass. Don't think anything was knocked while fitting new filter but worth checking. The unit does not have a draft lever, but has the slot for one, I think. Not at tractor now but will check.

My 3 point still not working. Have run unit for a while to clear any air bubbles in hydraulic system. Also checked the 3 point speed control in various positions. Does anyone have any new ideas I can try. Thanks

Thanks for response. Yes, have had the tractor running for a while. no signs of air bubbles. The speed control knob below seat appears to work and was certainly working before I changed fluid and filter. So have tried that in all positions.

New to the Forum, so this question has undoubtedly been answered many times before. L3010 GST. Loader and 3 point working fine until I changed hydraulic fluid and filter. Now loader works OK but the 3 point does not. Any ideas? Thanks