Search results

I have about a gallon and a half more of the fluid so my theory is run it a little bit since the hydraulic screen is in place let it chew it up and then let it sit and drain some out once it's settled. hopefully get most of that crap out and clean the hydraulic filter. Then top it off with the...

I was doing a service on my 6100e and everything seemed good till I was screwing the transmission fill cap back in and right at the end it just twisted off with almost minimal effort. The problem was what was already in the threads was frozen and would not come out and I had to chisel it out. My...

Thanks for the ideas, I'll try that.

Picture of new vs old part

I have a b6100 that I'm trying to swap to adjustable lift arms. I found some on Amazon that are what I need but my issue is the eye is 3/4 vs 5/8 pin size. The stock pin is 5/8 with a 1/2 inch stud and not enough usable space. I've looked everywhere for a 3/4 pin with a half inch stud and 1 3/4...

Did you have any luck with this? I have been searching to do the same and have had no luck.