Search results

Wolfman, you should change your name to; THE MAN, because you are THE MAN! :D It was just what you said, shift forks weren't in the collars. It did seem to go back together kind of too easy the first time. Also the the linkage for the forward/reverse (shuttle?) selector was not in quite...

Pulled the whole trans cover. He's pretty sure he got the forks lined up. Spin the shifter half way or the shaft on trans? It wouln't move at all, then we took shifter cover off and found the dot was down on shaft, moved it to up and now it moves, but only 4th and 8th. All the rest when you...

Everyone, especially NI Wolfman, I have to say I was wrong, and Wolfman was right. We put that valve and spring in the way you suggested and we have power steering, it worked! It's hard because the tractor is not here, so I can't just go out and look at it before I post anything, plus we are...

Guys, thank you thus far. Wolfman, thanks for the pics. I've taken the one you sent and highlighted the area in red that I believe is were our line screws in, the local dealers have been no help so far. You gentlemen here have helped more than the dealers have. It seems that no pictures or...

Wolfman I do believe you are on to something there, is does have the GST trans, I thought the DT meant it was four wheel drive(dual traction?). He now says he's pretty sure the spring came out first, and the valve second. I believe you answered the next question as to what way the valve...

I certainly appreciate all of your input on this, one question though. It seems the pics and drawings you are posting is of the steering box, the valve I am dealing with is from a block under/near the pump. The fitting/valve in question has one end of a pressure line screwed into it, the other...

The fitting is tapered on that side, seems to fit the valve point well. There is a very slight mark on the tapered end of the valve that seems to fit the tapered end of fitting. I don't know what the spring would sit against if it went up in the block first. The spring easily fits into the...

Hi everyone. Please help a newbie if you can. I am helping my Brother with his L2550DT, he was replacing the power steering line that goes from I believe the steering box to the block under the pump. He couldn't get two wrenches in there, so he took the fitting out of the block along with...