Search results

100DT, thank you. With having a 3 point backhoe, I "assumed" i could not move it around, but, come to find out it does move on there still. I moved the lever a little forward from all the way up, and thw whine went away, and the FEL controls work like I imagined they should. Will I have an issue...

Last night I pulled everything out of the control valve, stripped it. Made sure everything looked clean, didn't see any obvious signs of wear on the two pistons, or the sleeves they ride in. Again though, I am missing the two balls that go in the float detent....which that end where the balls...

My FEL is running off of the tractors pump, there is no pump attached to the crank on the front of the motor. In this thread, this is the exact control valve I have. http://www.orangetractortalks.com/forums/showthread.php?t=16663&highlight=1200+control+valve&page=2

Looking at the parts diagram for my control valve, i am missing the two balls that go on the end cap for the float detent. That cannot be why i am having issues, correct?

In looking at others posts on controllers, they talked about pins and springs. I just pulled mine completely apart and the only springs I have are on the ends of the shafts/pistons. I am stumped.

First, let me say that I have been reading all the posts I can find on the 245, and the 1200, as I just recently purchased the tractor and am trying to learn all i can. Overall, the tractor seems to run good. The backhoe has plenty of leaks on the cylinders, so those will need to be fixed before...