Search results

So through the process of elimination I found out the problem was an issue with the wire from the key to the starter. I was able to start the tractor by putting cables from the battery to the connector on the starter where the key wire goes and it started. Thanks guys!

Yes, in the first photo there was no reading with the ignition in the On position. I put the red lead on the starter stud and the black lead on the mounting bolt and in the start position I got nothing, in the off position I didn't get a reading but it was almost as if it was trying (V was...

Hi there, I've included two pictures using the multimeter. In the first I have one lead on the positive cable lug and one on the starter terminal post. As you can see I don't get a reading at all. In the second picture I have one lead on the terminal post and one on the end where that black and...

I'll charge my battery pack and give it a go!

I'm not sure where the safety switches are located on the tractor. I've tried looking online for diagrams and have so far had no luck. Are you aware of what safety switches there are and where they are located for this particular model? (L2950). I will try your suggestions. Wish me luck!! Thank...

Here are a few more pics of the starter! I agree in comparing other starters, this one is definitely different. In just trying to figure out where the solenoid is so I can actually test it. Are you able to label it on the photo for me?

Are you able to tell me where the solenoid is located?

I have a Kubota L2950 that won't start. All the lights come on when I turn the key but the tractor won't turn over. I placed a multimeter on the battery which registers at 12.5 volts. Can someone give me any suggestions on my next step? I know some basics but don't have great experience with...

Thank you so much for this information! I'll look into it through a local dealer. You've been of great help!!

Hey, sorry for the delay. I've been away with work and haven't been able to get back to my tractor. Here is a pic of the serial number.

Trying to change the fan bearing on my 1991 L2950 Kubota. We can't figure out how to get the old bearing off the shaft and the new bearing on. Any tips or advice would be greatly appreciated!