Search results

My b1750 had a odd problem this weekend after bush hogging for 4 hours. When i turned off the ignition i noticed a regular ticking sound continued. I listened and found that the relay switch ( little black box) that is below the external flasher know, was ticking like the flashers were on. I...

i had something similiar today on a b1750. After some painting of parts, reassembled and started, key wouldn't turn it off, so pulled manual shutoff knob. Then it would'nt restart, no light, nothing at all. What setting on electric ohm meter and which wire where? Thanks.

I removed fenders and foot plate today to paint them and the frame, only disconnected R rear hazard light at fender connector. Put all back together, started tractor to run and noticed key would not turn tractor off , so pulled shut-off switch. Tried to restart and not light on dash at all, no...

I have a 2wd b1750 that I think needs front wheel alignment. If i turn hard right, the front wheel get stuck completely to the right and the steering wheel can't return to straight. I have to get off, and push the wheels back straight. The R steering control arm is at an angle almost parallel...

Thanks guys, I'll try both and see what I find. I like the flash light idea. I could also put 2 or three on the rops multiple directions and intensity.

Yesterday went out to plow garden and as it became dark, turned on headlights on b1750 and only the instrument panel lit up. Flashers work, but no headlights and bulbs are fine. Where do I start trouble shooting. I'm not bad with most mechanic work, but I'm weak on electrical issues. thanks...

Robert, thanks. Does messing around with the side links on tph do much, or just leave them even between right and left?

When things warm back up, i plan to do a touch up paint to the frame on my b1750. How much prep should i do before using rattle cans of expensive kubota blue? I know if should sand down rust, but what about areas that are fairly intact, just dull? Best product to remove oil and grease in...

cool idea. I've noticed while running my b1750 geared 2wd, it have a little frothy trans. fluid on my trans. dip stick. Does this mean I've got a little water in the fluid? It's not much. i keep tractor in barn always unless in use. thanks.

I have a b1750 and having a bit of a challange getting my single turning plow to align properly. I can get the depth right, but aftern turning a row then putting the right side wheels in the furrow, the plow is just a little too far left and leaves about 6inches of unturned ground. The ground...

I agree totally. I pulled the top link and will be taking this to the dealer to make sure it's a match to the paint they have in stock.

Is this blue the same color on my 1991 B1750. My dealer says it's really grey, not blue, but it kinda looks blue to me. I found the after market paint too, but was not sure the blue or the grey would be my match.

what size bush hog do you have. Just got a tractor like yours with a 4 foot rotary mower. Tall grass and bermuda require 2 passes for it bogs the engine down. Do you experience this? Also, when I run across a slight hill with the exhaust on the uphill side, i loose power. Ever experience this?

What all does the fuel system service include. I don't think I've done this since owning it for 3 months. I do put fuel stabilizer in each tank all year. If something possibly floating in tank and blocking pickup, would draining tanks and inspect the inside work? Thanks.

"91 B1750 2wd 750hrs loosed power while running bush hog only when R side of tractor is downhill. Otherwords, driving across a hill with exhaust side uphill. Once I turn up or especially down, power comes back. Hill doesn't have to be that steep. No smoke, just power goes down like putting...