Search results

I have about an acre of lawn which I mow with my 56" wide midmower deck . Unfortunately, the air intake is just behind the radiator, right over the the front part of deck, and it suck grass clippings from underneath causing the screen to plug up, resulting in engine overheat. Sometime I have to...

Thank you for the link with the excellent examples!

Thank you, much! My cab cover is a soft cover, paid about $1,000.

Thanks, I will!

This ($s) is more in line with what I was thinking. Knowing what I paid for it. I appreciate the suggestions!

Thanks, for chiming in. I appreciate that! I think, your suggested figure is about half of what I paid for without adding the mower, and the cab cover. Your are right, when I got it - didn't know what to look for, the plastic body had cracks. I bought a new one ($400) and installed it. Have a...

Hello: I bought a 2008 BX24D in the fall of 2016. It came with: Backhoe BT601 Front Loader: LA240 Snowblower: BX2750D Since I bought it I have added a Mid-mower deck: RCK54-23BX With mulching Kit ORIGINAL Tractor Cab #11970 Electric Chute Rotating Kit: GB2514B-1 I do not know exactly how many...

Please forgive my ignorance, but what is SSQA? Thanks

Great idea! I made a dolly using two of the 12" dollies from Harbor Freight to store it standing up while not on the tractor, but I lost all the oil in the mower gear box. Is that normal, or something could be wrong with my 54" deck for my BX34?

You are right! That is what I ended up doing, but not being a mechanic, it took me a few hours! I was under the impression that the hydraulic hoses needed to come off first. Now that I know how to do it, I could probably do it in a couple hours. Thanks for chiming in!!

My 2008 BX 24 power steering cylinder was leaking fluid. I talked to my local Kubota dealer and he suggested to replace the power steering cylinder kit. Their tech told me to remove the unit using two bolts on each side, disconnect the power steering hoses. He also gave me printed instructions...

As has been said, it is a good find - really low hours! I paid 13.5 for a 2008 BX24 with 600 hours. It has backhoe, FL, and front snowblower. I bought a used 54" mower deck for $1,600. Not to mention I discovered after the purchase that my rear fender is cracked and needs replacing - $420.

I think he is about right! If you live in the northern climate, where the mowing season is around 4 months, and you have less than an acre to mow. I'm new to my 2008 BX24, and started with a full tank of diesel for winter using my snowblower. I have about 220' driveway, 16' wide and still have...

The Forward and Reverse Pedals on the Orange tractors are designed by a moron! I bought my BX24 sight unseen. Just found out that I couldn't use the Back pedal due a knee replacement that went bad. I would have never bought it for that reason. I would much rather have a Green tractor where...

Re: BX24 Rear Fender Replacement- Update I just talked to body shop. Showed him a picture of the crack. He said it can definitely be fixed (cost around $250). with the new around $400, I'm not sure if it is worth fixing!

Sorry for the delayed response as I have been out of town! Thank you all for sharing your insight. I very much appreciate everyone's input. Unfortunately, it is plastic. The crack is on the right hand side just to the left (towards the driver seat). I wouldn't mind spending ~$400 or so if the...

Hello, All I'm a relatively new owner of a 2008 BX24. After purchasing it a couple of months ago, I discovered, among a few other issues like bad battery and bad front ball joints, the rear fender is cracked. Has anyone replaced it? The best source for ordering and any hints on DIY replacement...

I'm a recent owner of a 2008 BX24 w/FEL, backhoe, 50" snowblower, and recently added a 54" mower deck. I also recently purchased (still in the box in fact) a Hardtop Cab mainly to use with my snowblower. My blower has a manual crank for the shoot. So, my question is would I need to get a...

Hello, All, A new member here just jointed this group. I just bought a BX24 tractor and am in need of 54/60" MMM. If you have one to part with please PM me. I would also appreciate those who use one to suggest what model and where to buy one. Regards to all!