Search results

I'll check to see if the needle is touching. It seemed to move fine until it got to the position where it is now. I'll take a look for loose wires. This is what the gauge looks like when off and running.

My RPM gauge started to act weird a few days ago. On start up the needle would jump to a random number and once started it stay at that number while idling. As an example the needle would jump to 2500 rpm and show 2500 as the idle speed. If I increased the throttle the needle would move but...

Take a look at Gator Blades. I just got a set and quiet happy with them. I don't have the mulching kit tho. http://www.orangetractortalks.com/forums/showthread.php?t=24738

I bought them at a local landscape supply company. They sell lawn mowers and chains saws. The model I got is 396-612. They fit perfectly, no modifications needed.

I ending up buying a set of Gator Blades. It made a big difference in the size of grass clippings. I'm much happier with how the mower distributes the finer clippings now. The blades are beefier and have a longer cutting edge compared to the stock ones.

Thanks! I checked the side to side level but not the front to back.

This was the first cut of the year. The grass wasn't that tall. I expected a better mulch I guess. The grass coming out of the discharge shoot wasn't really mulched at all. I made a few passes over the grass windrows but it more or less just blew the grass out without really chopping it up. I'll...

Just mowed for the first time with my 60" mmm. I'm not real happy with the amount of clippings left on the grass. I would like to know if I should sharpen the blades so that the cutting edge is sharp to touch. The blades are in good shape, no big dents or anything but they do seem a bit blunt. I...

I've got the same problem with my BX. I adjusted to return spring and it didn't help. I'm out of ideas of what to do next.

I have the same problem with my bx2370! I have adjusted the HST return spring but the tractor still doesn't stop the way it should. The stops are inconsistent. Sometimes when backing up it will stop abruptly and other times it slowly coasts to a stop. Forward stops are more consistent but the...

I did the same as above. I put an adjustable ball mount in the hitch receiver and can adjust the height if needed. This setup is doesn't interfere with the 3ph. The holes on the bumper hitch almost line up. I had to drill out a little extra on 2 of the holes. I'm happy with this setup!