Search results

Well, I switched the hoses and determined that it is, indeed, the rams again and not the valves. I forgot to mention that before i took the rams in to have the seals replaced I noticed rust at the bottom of the barrels. So I went to the auto parts store and got a brake cylinder hone and used...

I did that the first time and it was the rams. But, good idea, I better do it again and make sure it's the rams this time too. I'll get back with what I find. The reason i had the rams rebuilt is that I tried doing it myself but could not figure out how to get the darned"rings" back in the...

Hi guys. I have a B7200 with B1640 loader. The bucket tilt rams started drifting badly (visibly tilting so that I had to keep hitting the up lever to keep from dumping the load). So I had the seals replaced. Everything was good for about an hour of use, but they are back to doing it. I checked...

I looked on Kubotabooks but it doesn't look like they have workshop manuals. I went ahead and downloaded the $9.95 manual referenced above and it worked great. Now I can hopefully figure out how to check my relief valve pressure on my 7200! Thanks for the link.

I have my B7200 steering box apart and was just going to put it together. I was finding that the explanation of how to "time" the sector shaft gear to the steering ball-nut assembly found in the steering box rebuild article to be less than clear. With a little YouTube research, I found this...

Hi all. I have a B7200 with 810 hours. Well maintained. If I run it at 2500 RPMs there is no smoke at all. If I run it at 2000, it has a bit of blue smoke. I don't understand why running it at 2500 would clear this up. Any ideas?

I just bought a B7200 with turf tires and would love to switch them out for ags, or if I have to, industrials, but ags would be my first choice. Don't know if the 7100 and 7200 share the same bolt patterns. Do you still have the ags?