Search results

thanks for the reply and the info.I think all total . I have managed to do the complete repair for just under $500.00 . that includes a used #2 shaft the #2/3 pto gear , handful of bearings and seals ,gaskets and oil . hope to be running today by 9 or 10 if all goes well . guess I'd better get...

just came in from the shop I picked up a 5 gallon pail of 303 tractor hydraulic oil this afternoon got the tractor most of the way back together still need to install the 3 point lift cover and hitch arms could have stayed out there and finished it but want to be sure this oil will work . left...

I have a b7100 gear trans that i have just about finished repairing what oil do i need to run . i know it is hydraulic oil what weight is it the oil that came out was milky and nasty and had a trans failure so i need to get new oil to finish the repair but what really don't want to spend the big...

Finally got a chance to finish getting the tractor split apart and have got the trans separated from the rear axle assembly . now I need to figure out how to get the trans itself apart without causing any further damage and in a way that I will be able to get it back together any better...

Ok so I guess I need to figure out what parts I need for sure so I need to split the tractor do I just unbolt the clutch/driveline tunnel from the front of the trans and slip the shafts off as it comes apart I have all the brake and inter lock rods off . I got the pin out of the input shaft and...

i will try and give them a call tomorrow and see what a used trans might be... might be the best way to go ??? otherwise I will need to get started taking it apart or see what I could get out of it broken my wife doesn't think we should spend much fixing it though , but she doesn't do the...

I got the shift cover off and the oil drained think I have a broken countershaft hard to tell from the Kubota books manuals for sure but it appears to be broken just ahead of the gear also has teeth missing on pto #2 gear . now I need to figure out what kind or $ it will take to repair it...

I tried that yesterday . does not move at all in 2,3 or reverse gear and also has lost pto 2 and 3 still moves in 1ST gear and pto #1 works was able to finish mowing got it in the shop still will not move in any gear but 1st but works in 1st high and 1st low . if i get home early enough i...

Need a little bit of info or help here my b7100 broke today I was mowing with my 60 inch woods finish mower running along in second gear high range and the thing bogged down and died .It was hard to get out of gear put all into natural and restarted engaged pto and let it spin up then put trans...

maybe not but it still would be nice to know that it does work/I'm just trying to determine how big a job it will be to first troubleshoot then repair it . how much did it cost you to build the loader i see new loaders cost as much as i paid for the tractor with the implements .

hi i just purchased a 1978 b7100 4x4 with a brush hog and a tiller i brought it home and started going over things first i had to order new hubs for the rear axle way sloppy then started checking out all functions and determined that#2pto speed is inop #1 and #3 work but no #2 i have not ran any...