Search results

  1. P

    Water in fuel question.

    I hope the problem is resolved by now, but I'm posting because I just experienced (and successfully dealt with) a fuel leak on my BX2200. It comes from the sending unit on the top of the tank (left rear, under the fender). I had read about such problems, and when I first filled up mine, it...
  2. P

    Engine ran rough when hydraulics engaged

    Got some good additional info : What the dealer is explaining is that as the pressurized fluid is filling the "lifting" side of the loader cylinder (to lift the bucket), it needs to "vent" fluid from the "lowering" side of the cylinders. That fluid goes downstream through your rear remotes (if...
  3. P

    Engine ran rough when hydraulics engaged

    Thanks for the good advice GWD. The filter looks new.
  4. P

    Engine ran rough when hydraulics engaged

    Following up for anyone else who may have the problem. Had a discussion with the local Kubota dealer. It apparently happened because the FEL and was engaged while the scraper (3point hitch) was in detent, causing the two to fight against each other. I'm no mechanic, but that makes sense to...
  5. P

    Engine ran rough when hydraulics engaged

    Thanks! It was a trade-in that I bought from a dealer. They serviced it before selling, and at least the air filter is new, and the oil, etc. is fresh, so I'm pretty sure they did the fuel filters too. I'll run it for a while longer to see if there's any more problem.
  6. P

    Engine ran rough when hydraulics engaged

    I'm pretty new to this, but I'm stumped. Yesterday a friend was using my BX2200 (which I just bought). He raised the FEL pretty high and lowered the scraper attached to the 3 point hitch at the same time. The engine got really rough and rattled, then died. This happened a couple of times for...