Search results

I have a L3800HST with about 165-170 hrs on it. I recently had a 3rd function valve installed. When I took it to the dealer to install that 3rd function valve, I was told it was low on fluid, so they put almost a gallon in it. I had to take the tractor back because they installed the valve...

ok.. I just got a Land Pride SGC1060 grapple and the 380-153M 3rd function valve for my L3800HST. Just got it all hooked up. The grapple moves slower than molasses. But if you hit the lever for the rear remotes while running the grapple, it picks up some speed. Whe I picked up the tractor after...

I have been doing some brush hog work at a local park. MOwing some brush and some I root out with my loader. I apparently hitmy fuel bowl with a stick as it was leaking, I turned it a ways and it kind of skipped, still leaked, then I turned it a little more after the skip, it stopped leaking. I...

I am getting a land pride 3rd function valve installed on my L3800. It shows in online installation instructions to hook it to the power beyond ports. Where exactly is the power beyond ports on my tractor? A picture or diagram if available would be great. Also, is there a bolt or fastener of...

I recent ordered a Land Pride SGC1060 grapple and a Land Pride 3rd function valve kit to go with it. Both will be going on my Kubota L3800 HST tractor. I am pricing the installation of this valve and have a question. Looking online at the installation instructions, it says they were written...

A couple weeks back I was power raking an area for my dealer actually to get ready for seeding grass. I went to lift the power rake and nothing happened. crawling under the tractor in the dirt to try and see why, my son noticed a roll pin that goes through a shaft thats attached to the lift...

I need to get my pto shafts greased. How do those plastic shields come off so I can get to the grease fittings on the knuckles on each end? I have land pride equipment, a tiller and power rake. I do some landscape work so when doing more time consuming jobs, I need to make sure everythign...

I have a land pride tiller and power rake. I want to gt some gear lube and chain case lube to keep on hand. This is what they reccomend - SAE 80-90W EP oil for tiller gearbox Shell Alvania EP 00 for tiller drive chain and power rake drive chain SAE 90 alternate for tiller SAE 90 for power...

I am looking at getting some Land Pride implements to add to my collection. Currently I have a PR1672 power rake, BB2572 box scraper, RCR1266 tiller and PS1572 seeder. I was wondering if anyone has the following implements that I am looking at getting and if so, what prices they paid. I will...

Has anyone gotten the telescoping stabilizers to replace the turnbuckles ? I have a L3800 and would consider changing mine over if I can find a good set of telescoping stabilizers that arent to expensive. Im guessing there is aftermarket sources for them that are of good quality. If anyone knows...

Here are some pictures of work I did with my Kubots L3800 and Land Pride equipment. Most is primarily done with the power rake and some with the 3 point seeder.

I know you check the hydraulic fluid level using the the small glass sight window below the seat by the foot rest area. I did my 50 hr service and did add fluid for what I lost when changing the hydro filter. I can raise my loader as high as it goes, tilt the bucket and raise the 3 point as...

I have a L3800 and use a power rake and tiller on it. I did some landscape work for my dealer and am thinking of getting the Land Pride 3 point quick hitch as part of the payment. I mentioned it to my salesman and he said with the quick hitch, it will set everythign back about 4" and with PTO...

Last week while using my L3800, I pushed in the clutch and went to turn the PTO off, but when I let the clutch out, it stayed on. I moved the lever back and forth and it went off. Then it got to where it wouldnt shut off at all, but would just all of a sudden go off later on. Same thing happened...

I have a L3800 HST with a loader. I do some minor landscaping on the side. I have a piece of land to prep and seed with grass. This piece of land is on a pretty good slope. It is bare dirt that was spread with a dozer, so I will be power raking it to smooth it over, then fertilizing and seeding...

I recently had 2 hydraulic hoses on some new equipment come apart on me. First time it happened, it did right when I turned to looked back and I got it on the side of the face/head. The hose just pulled out of the crimped on end. Im no hydraulic expert, but I do know the hose should never come...

I was looking into a new Land Pride PS1572 seeder to use with my L3800 and was wondering if anyone has any experience with one. I plan to do some side work with my tractor and couple implements I got with it and a seeder like this would go well. I thought of an overseeder or slit seeder since I...

When I got my new L3800, the salesman reccomended using Kubota oil, hydraulic fluid, filters, etc. Is this necessary? I have awhile before I need to do any fluid changes, but wanted to ask what everybody else uses? This dealer sells several different brands of equipment, so I'm not sure if...

I am having my new L3800HST and attachments delivered this week. I am in central WI and it has been exceptionally cold this year. I got the tractor with a block heater installed. Reading through the book, I see where it lists warm up times with colder temps....it is like 30 minutes or more when...

I am getting a new L3800 deliver this week. It has the quicktach loader. Does anyone know if a snowblower can be used on the front of this tractor? I know the tractor hydraulics wont run one as it dont have the gpm to do it. Not sure how else it could run. Anybody know if it can be done?