Search results

I took the blades off of my RCK54 deck to sharpen them. Each one has 2 conical washers and one hex ID washer. To me it seems like that's 1 more conical washer than there should be. On 2 of the blades they were stacked and oriented like they should be with a single washer. On the other one they...

Are the mid PTO splines proprietary, or is it an industry standard? The deck for my BX1850 is 10 spline.

I have a BX1850 that's going to be delivered in the next week or so. I picked up a front mount power broom with it. My thought is to run a rear mount snowblower with the broom on the front. Does anyone have experience with this combo? Insight on how it worked would be appreciated.

The only things that still work are the glow plugs and starter. I can visibly see that one of the strands of the 10 amp fuse is loose. 1) What does the availability of these fuses look like? Is my local dealer likely to have them in stock? Might they be available at Napa? 2) Does anyone know...

Wondering if someone has a smaller 3ph snowblower that they could measure from the fan housing to the pin. I have a 48 inch Inland snowblower. It came with a cat 0 conversion where they welded extensions to the lower arms. I put it back to factory and now understand why they added the...

There's a b7300 for sale locally. The pictures don't show the 3 point hitch. If the seller doesn't have the parts, how tough will this be to replace?

Looking for input on the features listed in the title. I seem to recall folks having issues with the hubs on hexagonal axles on B6200's. Is this an issue? Can it be avoided by keeping the hubs tight? Bi speed turn seems like adding complexity to answer a question that I never asked. Does it...

I was at a garage sale and picked up a 2 stage air compressor pump for $35. It says Chinook and Made in italy on it. Image search looks like it's a K30 series. It's missing the air filter and possibly other things. Where would the model number be? I don't see it on covers on either end of the...

What's your favorite Normism from Cheers? Mine is: What's shaking Norm? All 4 cheeks and a couple of chins.

Has anyone needed to replace the fuses on one of these or anything that needs the same fuses. I've never needed to but it seems like something that I should have on hand. I keep forgetting to ask every time I'm at the dealership. The fuse box cover is missing as well so if anyone has fabbed one...

I've been on my 15 acre property for about a year. I'd like to get some cover going in a couple of areas. 1. Across the back of my property, there's about 3 acres between my lawn and the adjoining property. This is mostly brome grass that only gets about knee high because the soil is sand with...

I need to change gearbox oil in my RFM. There's probably a plug on the bottom but it would be over the pulley and I don't want to get oil on the belt. There's a plug on the side so my plan is to tip it on its side and drain it out of there. Does anyone have a better idea?

Has anyone ever done a germ test on feed oats from TSC?

I have a lot of poplar trees on my property. Many border on or are in my wetland. The ones in my yard are always shooting up little trees from the roots. So if I mow the reed canary grass around the drip line of the trees in the wetland, will they put up trees from the roots?

So I'm looking at nextdoor. Someone was complaining that a deer died in their yard over memorial day weekend, they called the cops and the cops didn't do anything about it. She called the mayor's office and apparently someone there was going to send out someone out. Now if a deer dies in your...

I posted a thread in the buyers guide section and didn't get any response so I thought I'd try it here. Are there known issues I should look if I was looking at a G1800 with all wheel steering?

Thinking about looking at a G1800 AWS diesel with deck, blade, and snotblower. Are they known for any issues? ie weak hydro, decks that rust out or eat spindle bearings, that type of thing.

I had about 5 deer licking the concrete cover for my lift pump the other day. I picked up a salt block with trace minerals on my way home. I live on very sandy soil, so the ground doesn't hold much for minerals. What does everyone use for minerals that they put out for deer?

I have a few acres that I want some sort of legume on. I'm on sand. It needs lime which I'll be putting down this spring. Now I understand that the lime will take some time to work and that fall is a better time to plant, but I want to get a quarter acre sample or 2 down this spring. The land...

Looking for a PTO shaft with the standard 6 spline 540 connector on one end and a 1 inch keyed and drilled female on the other. 1 3/8 is common. I've found 15/16 and 3/4, but no 1 inch. Tried a TSC in person and agri supply online. Looked at Amazon a little bit. Any suggestions? Or do you buy a...