Search results

I bought the following pump from Amazon. https://images.app.goo.gl/UPM1dFL1TVc8swBk8. It looks same as the Temu pump. It has worked good. I would highly recommend that you install a filter on the discharge side of the pump. The vanes in these pumps are plastic and when they fail you don't want...

I set mine down and then give it a good push down. I believe there is a gasket or some material to help reduce rattle noise. I will check mine tomorrow.

Sorry for confusion, At the time The Redline was made to order.

I have the Virnig model. Bought it from Messicks. It's USA made. I use it more than my standard bucket. If you have clay soil or soil like clay the 3" is what you want. Redline makes a 2&3" space models and they are the ones that recommend 2" sand/loss soil and 3" for most others including clay...

Rerouted hoses.

S-G-R thanks for advice. I did try through the QH first, but the hoses wanted to lay in the QH clamp and equipment pin. I did test the movement slowly and the over the top was a better option with the cylinder connectors turned 90 degs away. I'm going to turn cylinder connectors to straight...

Installed top link and blade angle cylinders. Top link should be real handy for fixing the driveway this summer with the box blade. The blade angle for snow this winter.

Issue has been resolved. Below are the answers to my questions above. 1. No, the top plate can be flipped and it doesn't make a difference. 2. The paint does need to be removed and the holes in the frame need to be smooth. I found 2 large vertical burrs in the lower hole. 3. The plastic or...

Little history: I purchased a new RB1672 Rear Blade back in late December. When I got it home in December I was only able to rotate it one hole in either direction. I figured it was rusty from sitting on the lot and not a big deal. I sprayed it with fluid film and then used it to plow snow. I...

Installed rear remotes on my LX2610.

I have Woodmaxx MX-8600. It was purchased in February, it has 20 hours of run time and no issues so far. I did have to change the blades at 16 hours. This is not a negative, I was chipping dry wood which is tough on the blades. The blade change was easy. Also chipped some pine branches with...

All of their products are made in China. The woodchippers are made in the same plant/s as the Woodmaxx and Woodland Mills import stuff. The Woodland Mills and Woodmaxx import chippers are now being sold under various different names by various internet companies. As other have mentioned the...

To me it looks like they sent you the rake for offset model (does have a second set of alignment pin holes) and frame for the non offset rake.

I use this Permatex product. If I'm in a bind, I'll use tape then make the proper repair ASAP. https://www.permatex.com/products/thread-compounds/thread-sealants/permatex-pneumatic-hydraulic-sealant-36-ml/ Another option is Hercules paste. I use this on LP gas lines and Compressed Air lines...

I wasn't going to respond to this whole CC interest thing, but what the heck, might has well stir the pot. The interest is calculated at 1/12 of the annual APR per month on the remaining balance (this also includes any late or yearly fees). So for simple math if the APR is 24% the monthly rate...

The answer is yes, you can move the tractor while it's warming up. Keep the rpms low and accelerate slowly. I keep mine in a garage, so I have to move it out to warm it up. CO2 is bad for the tractor and it's really bad for a human. The tractor should be at normal operating temperature before...

As Skeets stated, the only issue could be with a Mid Mount Mower (mmm). I would get a second opinion from another dealer.

Sorry for the confusion. I wouldn't feel obligated if I didn't approve the fabrication.

It looks like landpride has one for the L series. See the link below. The spec's list all of the top and tilt options for a bunch of different models. https://www.landpride.com/products/10617/Top-&-Tilt-Kit I ordered a top link for my LX.

If they have the item and are ready to ship it, they should be paid in full. This is normal, as they have no way to collect payment after it leaves their business. The consumer has an option to get their money back if the item is not delivered. The worst-case delivery time in the lower 48 is 10...