Search results

Thanks guys, I really appreciate the advice!

You guys haven't steered me wrong yet. Which is the better the manufacturer for a 5' foot box blade? The Countyline is the standard stock one for $750 and the Bush Hog is the CBX series for $800-850. Thanks in advance!

I have an 18' dovetail with a gate and it works great for my needs. Mine was a leftover and I picked it up for about $2700 if memory serves me correctly. If you can find one with spring assist on the gate, trust me, get that one as your back will thank you after a long day. I also put airbags...

Thanks everyone!

Will a BX23S handle a 5-foot rear rotary cutter?

Hi everyone, I thought I'd do a quick update. The middle buster worked pretty well overall. Where the ground was pretty soft & muddy, the tractor walked some, but that was no fault of the implement. Once the ditches & trenches get cleaned up and the surrounding ground dries, this will be a...

BigG, thanks for the reply. We have other tractor options. The ditches have been poorly maintained and it is probable that the BX will get stuck. The thought with the smaller tractor is that it can easily be pulled out if stuck and it will be a better option for us to straddle the various...

We have a small 100-acre farm and the spring/rainwater trenches and drainage ditches need to be cleaned out. Will a middle buster on a BX be a reasonable option for this project? I do not have any experience with a middle buster so any input would be appreciated.

Thank you everyone for the suggestions and input. I guess I will save some money for a future conversion.

Ok, guys, I need some advice. Unfortunately, I let a Kubota salesperson talk me out of a quick attach bucket and into a pin on. At the time of purchase, I did not have a need for another use other than moving stone, dirt and snow. His reasoning was solid as it was a smaller machine and the...

Everyone - thank you so much for your comments as it has been very helpful for me. I did contact Bro-Tek and they sent me an image of the three skid plates which I have attached. While it is definitely more expensive, I am going to go with Bro-Tek. Given the fact I will not be using a MMM...

Question for jmf78 - you mentioned a mid plate, I do not see a mid plate on Bro-Tek's website. I only see the rear and front plate. What does the mid plate cover? Thanks in advance.

Thank you everyone, for the comments so far. I have read on other sites that BXpanded is behind in their deliveries.

I'm looking for advice on which skid plate to get for the BX23S. The Bro-Tek looks beefer & stronger, but equally is more expensive especially when factoring in both skid plates. The BXpanded looks to be easier to remove/install. I do not run a MMM on this tractor and have no plans to do so...

Thank you guys!

Hi everyone, I'm looking for some advice on adding LED lights to the ROPS. My question is surrounding the wiring that is provided on the rear of the tractor. I found three factory wires taped up and appear to be for factory accessory lighting. One wire is hot to the battery, the second is...

In my view, get a 7,000 lb, dual axles trailer with electric brakes. Anything less is dangerous. I pull a Barron 18' dovetail, here's a link: http://www.trailerbaron.com/trailer/7000-gvwr-professional-grade/ Good luck!

Thank you everyone for taking the time to respond. I will get the 5 ' blade.

Hi everyone, I am new to the forum and looking for advice on the best or ideal size for a back blade on a BX23S. The two primary uses would be for snow removal and levelling dirt (after digging a ditch, yard, etc.). I'm interested in an offset back blade for more functionality. Any...