Search results

Ok I got it figured out, I had to turn the junction block valve to the closed position and the line coming out of port 4 (outlet) that was just blocked off and hook it into the power feed for the backhoe out of the FEL control valve to charge the outlet line to the lift arms. Thanks for...

Dave the FEL has seven hoses to it. One hose coming off the the junction block under the tractor, number four outlet port goes to a dead end male quick disconnect just hanging and not hooked to anything. Any ideas? Thanks for all your help!

I think your on to something and I’m going to try that and will let you know. Like I said the old fitting is all rusted so it’s going to have to be replaced or cleaned up. Thanks again for all your help!

I would have to switch it with a hose on the loader. I don’t know what it would be for just hanging there. As I said I think it’s just my ignorance! Lol

I’m wondering if maybe two hoses have to be switched when using a brush hog. The fitting is all rusted so I will have to get one to replace it with to even try it. I really do appreciate y’all’s help!

Yes that looks like what I have! I aslo Noticed it has one hose from that valve that has a quick coupler on it that’s just hanging there going to nothing.

It does have seven hoses going into the front loader control valve! Thanks for all your help!

The pto spins but the arms won’t lift unless I switch the valve underneath the tractor, but then I can’t use the front loader, it won’t raise!

1992 kubota l5450 I cant use the front loader at the same time with brush hog. I can turn the control valve under the tractor and make one work and switch it to make the other work but can’t get both work together. I think it’s just my ignorance but would appreciate any help. Thanks!