Search results

  1. T

    Stalling on slope BX2670

    I went thru this a few years ago. Don't want to pull the tank. Will look for the algaecide. Thanks.
  2. T

    Stalling on slope BX2670

    Tractor 8 years old. It wanted to sputter on or after slope. The fuel line is clogged. I removed the fuel line as it enters the first filter. A trickle was coming through. I blew some air through. Viola. Problem fixed. It may happen again, but I know what to do. Working fine. You have...
  3. T

    Starting a G6200H Problem

    Russell, thanks for the help. I did a direct connect from the starter switch to the solenoid. It works. This is an old machine that we just use to pull a wagon around. It'll do fine.
  4. T

    Starting a G6200H Problem

    Russell, sorry if I'm a little obtuse. When I turn the key to on, do the 12 volts emanate from the switch, thru the circuit to the solenoid? In other words, when I put my tester on the black and white striped wire on the switch connection, should it read 12 volts?
  5. T

    Starting a G6200H Problem

    I assume that I should have 12 volts coming off my starter switch??
  6. T

    Starting a G6200H Problem

    I'm dxing my starting problem. What should the voltage be at the little post on the solenoid when I turn the key?
  7. T

    jump starting the G6200

    I have a similar problem. What should the voltage be?
  8. T

    Kubota BX2200 Chugging and losing power

    I have a similar problem. Based on another post, I looked at the line to the fuel pump - frayed and bare. Am fixing. I'll let you know if it fixes the problem. It didn't fix the problem but blowing air thru the fuel line before the first filter did. There was only a trickle then came the flood.