Search results

A few I kept while clearing off the memory card from shots taken this last summer with dad's old Nikon D90 base (digital) and old school lenses that mount to but don't interact with the camera (so all settings and focus are manual.) I enjoy having to figure it out but then getting the ease of...

I struggled finding anything Kubota. Ended up ordering three of the 70# JD weights and fabing up a bracket. Bracket doesn't have to come off for FEL and weights just slip on and off bracket (no bolting the weights).

I really like the B2601 for my situation. I thought I might outgrow a BX so went with the B. If you have room to store and maneuver I can't imagine you would be disappointed going up in size from the B.

I've got the the Betsco heavy duty 48" with forged hammers. Been a good cost effective option. Very basic machine but does what I need. If not already aware the spacing on the 3 pnt is not quick hitch compatible.

trail flail!

First trip outing once you are able has got to be taking Theo to the "Slurpee Store" !!

Ok what I was calling the case drain is where the tank line from the 3rd function was plumbed as received so I assumed it was a drain. Sounds like I need to find a proper drain location for the Summit tank drain line. Thanks Dan.

I checked routing again so let me clarify. Not saying this is optimal but it has worked. Also dealer told me Land Pride on the third function but I haven't verified. I start with this outlet on the tractor (the 90 deg tube fitting with hose exiting bottom of pic): In to the power port of the...

Yep I went manual valves for simplicity of install and for me better motion control of the cylinders. Also I did use the same return tank location as the third function (Land Pride), just added the tee you see here to bring in tank line from Summit valve body.

Here's my 3 remote setup with Summit valve plumbed as Dan described off the third function valve body (plus I added top and tilt cylinders). Any new lines I needed I got made locally. Super pleased with how this has been working.

The little B has been indispensable on the 'grill porch' project. Was excellent at carrying tools and materials up from the barn and then moving stones and gravel (for dog run). What is a 'grill porch' you ask? It's a place to store grills & smokers outside (behind those sliding doors) to...

Hey rc51s... - It's homemade, everything bought piecemeal. I fabed the junction support / return drain mount plate (and the tank carry frame). Hoses were ordered to length. I found the orange (:)) spray hose on Amazon. Can't recall where I found the best deals at the time on roller pump and pto...

I'm no S-G-R, but putting the watering rig to good use...

Hey g_man : At the time shop.deere.com was the best I could find them (unless you bundle with an order from Good Works Tractors.) Everywhere else was crazy money on the shipping. None of the local-ish dealers ever had anything in stock. Only option was green so bring on the paint! They came...

Fabed up a front bracket to take 3x of 70# suitcase weights

Steps I take when removing... - bucket full dump position - then move release lever - position edge of bucket to where legs just off ground - when legs properly start to take load points in pics come into contact

Not to up North standards but still pretty cool to see in southern Indiana (only other time I have seen here was over 30 years ago)

Thanks yeah part of the mission will be to go where the rental unit can't so need to be able to carry in

New toy - WC68

Finished install on top and tilt. Parts list: Agristore side (15-20") and top (18-26") link cylinders, Summit open center 3 valve monoblock, bushings and longer pins for side link, locally sourced fittings and made to order hoses, steel plate for mounting using preexisting holes in ROPS...