Search results

It does and especially when you figure out the tricks. Best one is using the loader to lift the front and roll the deck under the front wheels. My trick for re-mounting is once the deck is back under the tractor, the first thing I do is connect the front bracket/carrier thingy. This helps a lot...

First snow to clear with the B. We had our driveway paved last year so I used the poly Edge Tamers. They worked great! Leaves about an inch on the pavement to keep it from turning into a sheet of ice!

This is a game changer! Glad this thread got bumped and so is my right knee. Took the spring off and used the tractor for about an hour and operated with no issues. Thank you for sharing!

Nice find!

They are worth every penny IMHO. Plus side they are super simple to install! Paul and Kathy are super nice small business folks.

https://www.specialtyrepairscustommods.com/b2301-b2601-mods has everything you need!

Thanks! I don’t trust the metal or plastic ones.

The seat came with the holes, I assume to get your hand in the for the built in safety switch that I didn’t use. But I did use the openings to reach in for the bolts (y)

I use a Titan Attachments arm. Worked great on the BX and even better on the B! Choker chain I found on Chinazon works pretty good.

I did take a file to all the edges and corners. I was surprised at how sharp the factory edges were :oops:

I kept the aftermarket Northern Tool Suspension Seat I had put on my BX and was time to tackle installing on the B. I studied the slider mechanism and brackets and compared to the suspension seat and decided a “simple” aluminum plate would be sufficient and snagged one off Chinazon. this is the...

Got around to putting fuel filter guard on from Paul and Kathy Short. Those bolts are 2’ breaker bar tight!

Well, about that time, I had a BX1850 and we just moved and went from mowing 1 acre to 4 and plowing snow on a 50’ drive to 1000’ drive. A new B was out of my price range and used was hard to come by. I settled for a ZD and loved it. I grew tired of multiple machines to service and can now...

More grapple training today. Wish I could have afforded this machine 10 years ago!

Got some seat time trying to learn the ways of the grapple.

I have a 4 bank Battery Tender Plus and got some longer tender wires off Chinazon to reach everything. I keep tractor, Harley, and 4 wheeler charged. The keep the wire on the ground protected I got some heavy rubber wire protectors thingys the wire runs through the machines can drive over them.

I installed eufy cameras all around the outside of our house and a good view of the shop. They work great and no monthly subscription. They are connected to our WiFi so I can check on things on my phone no matter where I am. A little pricey but well worth the piece of mind.

Traded them in. Was surprised at the value of the 16 year old BX and disappointed at the value of the ZD but it evened out.

It finally happened, the new B2601 arrived. The delay was complicated by the dealer could not get R14 tires. I confirmed with several other dealers that Kubota does not have them and doesn’t expect to get them until February or March 2024. The run around from the dealer was over the mower deck...