Search results

OK guys, I had a friend offer to help me this weekend and take this thing apart. Since I will have the thing apart what other things should I go ahead and change out other than the clutch. thanks,

Going to take a long look at it this weekend and decide if I'm up to the job. I feel it would be best to have a hard flat surface, that I will not have at the farm. I think the preasure plate is still in contact with the clutch so I don't think it's safe to drive it very far. About a mile to...

Thanks for the reply's fellows, and that's what I was afraid of. I guess the next step is to dig into it, and decide if it's best to go with a all new clutch or rebuild. I'm not sure I have the time or expertiece for this job. Tractor is 2 hours from my home and I'm only there 2 to 3 days a...

My early 2000 L4310 with 2100 Hrs, that has been great and other than replacing Hy hoses, no issues at all until now. Doing some box blade work yesterday on a bit of a hill. As I pushed in the clutch to made a gear change the tractor started to roll back and I hear a loud pop. From that point...

Two of the short hydraulic hoses on the front of my FEL are leaking around the fittings. One nice size drip about every 5 mins. Should I go ahead and change them out or just keep an eye on the fluid level and keep going. I would also like to know if all the fittings are the same size and would I...

Thanks for all the replys, Only took 1 qt. after I moved it to a level part of the drive. As far as motor oil is 10-30 what most run in the South.

GWD, thanks for the information. I will stop by the local Kubota dealer tomorrow and pick up some hydraulic fluid. I did not see any lines in the window and it just looked like a white background. I did look again and the fluid is at the very bottom of the window just hard to see. Thanks again

L4310D 4WD: Sorry to ask such a dumb question but I'm new to tractors and I don't have a Op manual. On the rear chuck ( not sure what its called but it has the small glass window ) above where the pto is has the window to check fluid. Do you check the level when the tractor is running or off and...

The front tires are close to shot and when I looked up the size the only thing I could find in the 10 X 16.5 was skid steer tires. Would my 1999 L4310 have came with skid steer tires and if so what standard type / size of tractor tire can be used. I did not find any standard tractor tires in...

Thank you for the reply. I checked and 4WD on is up as yours is.

Thanks for the information. Hope to do my first cutting this weekend.

When bush hogging with my L4310D what would be the best RPM setting. The bush hog is 6' wide. Thanks, Bowhunter

Hi all, New to the site and new to being a tractor owner. I have a new to me L4310D 4WD with a loader. It's a 1999 with 1400 hrs but in very good shape. The question I have is the 4WD on/off lever is on the lower left hand side and the stickers have peeled off showing in or out of 4WD. The...