Search results

  1. J

    RCK60B-22X Deck bearing replacement

    I'm changing spindle bearings for the first time on this deck. Are there any tricks to getting the bearings to slide into the hub? Does anyone put the bearings into the freezer before installing? Also, when I took mine apart, the top boss had a lot of wear wear it fits into the seal and...
  2. J

    BX2200 Belly Mower RCK60_22BX Gearbox play

    I have a BX2200 with a RCK60-22BX belly mower. I noticed some noise when running the deck so I started taking apart the spindles/bearings. The center shaft had a lot of play and a very bad bearing in the holder. After taking the gearbox off, I noticed the output shaft of the gearbox has...
  3. J

    RCK60B-22BX Gearbox oil seals

    Hey White Tiger, If you need to take the output shaft out, to put the pulley on, can you just leave the pulley on to begin with, take the shaft out (with pulley), replace the seal and then put the shaft back? I'm getting ready to do mine for the first time which is the reason I'm asking? Thanks
  4. J

    BX2200 RCK60-22BX Mower with play in Gearbox output shaft (blade)

    Thanks for your reply. I will tear it apart and see if I can tell where most of the play is coming from...the bearing in the gearbox or the bearing in the holder.
  5. J

    BX2200 RCK60-22BX Mower with play in Gearbox output shaft (blade)

    As a followup to my post above, looking at the parts diagrams, I guess the play in the center blade pulley could be coming from a worn spindle bearing in the bearing holder, right and not from the gear box?
  6. J

    BX2200 RCK60-22BX Mower with play in Gearbox output shaft (blade)

    I just bought a BX2200 with an RCK60-22BX mower. I took the blades off to sharpen them and noticed there was play in the middle blade and pully which connects to the gearbox output shaft. I thought it would be a good idea to change the gearbox oil and also grease the other 2 spindles. When...