Search results

Wanted to follow up with you fellas and let you know I got it back together and running! Thank you for all your help and advice! I only had a chance to put about 10 minutes of drive time on it, but it seems like the bearing/case situation is ok. I ended up taking your advice cutting the old...

Yea I think it is going to work out ok. Didn't get a chance to fool with it today because of work. Just tryig to get all my parts together now. I will keep you fellas posted. Some of these parts are 5-10 days out before shipping. Also, checking with local kubota dealers, and auto parts stores...

Well the book did say hammer it out... I did take that a little to literal haha. The sad thing is that I am not the first person to beat it like it owed me money. You probably can't see it in the pictures, but there is a bunch of dents that were there from the last guy hammering on it. Anyways...

So here are some photos of the carnage. I like the tubing idea, though I am thinking the washer is already on the shaft for this reason. I still have to knock the bearing out of the case. I can’t push it back through the planetary side of the case or the axle tube side. It seems like I will...

I did in fact manage to break both tabs although the bearing looks ok from what I can tell with it being stuck in the axle tube portion. What an idiot I am. Will take some pictures tomorrow once I am off work. Thanks for the lead on the used cases. I will go that route if the pictures show it...

Thanks everyone for the help up to this point! So I did get the axle out. You do have to pull the case, and remove a three sided retainer. It seems now that I have gone from the frying pan to the fire. So the enthusiastic beating I gave the axle the other day resulted in the inner bearing (no...

Rbargeron, i was looking at the WSM (albeit seems different from yours) prior to this and my copy says the same. I did get the outer bearing to pop out, but is there an inner bearing? At this point, I think I may have to pull the case to get at the backside of the axle to beat it out. Just...

Kubotafreak, thanks for the help. Unfortunately, like an idiot, I already tried to beat the axle out a bit before this. Hopefully, no damage was done. Will post back once I get it off.

Hello All, This is my first post so hopefully this is the right place to ask. I have a new to me L3750 4wd. I am trying to replace the rear axle seals. They are leaking hydraulic/transmission fluid when it is sitting. To remove the rear axle shafts do you just pull the axle cover (I.e. cover...