Search results

But if it was the fuel filter why would it start easily after a five minute wait? It’s the same every time. It stalls andI cut the switch and wait about 5 minutes then it will start and run again for about 10-20mminites and stall again. I can’t get it to start if I try too soon like within a...

At 50 hours. It only has 70 hrs on it now. Could that be why it ran good after I first got it back from the dealer? I took it for the stalling problem but it was near the 50 hour mark so I let them do the scheduled maintenance. I assume they changed the fuel filter. Think it may be the...

I’ll try and let you know. Thanks

I’m having problems with my tractor stalling. I can use it for about 20 minutes and then it will stall. Acts like it’s running out of fuel. I can cut switch off and give it 4-5 minutes then it will start and run for another 5-10 minutes or so and then stall again. It only does it while I’m using...

I’m the guy that had the problem with a stump damaging my sensor. I had a buddy replace it but it still doesn’t work. Tractor won’t start and code comes up again even after clearing it. He put an ohm meter on the repaired harness plug and it’s good but when he tried the ohm meter on the new...

Thanks for the help!

I had a stump to pull the wires from the crankcase sensor plug. It’s a 3 wire sensor. The wire colors are black white and red. The plug has the holes numbered 1 2 3. Which wire goes back in each hole? My tractor is a hydrostatic model of that matters. Just trying to get it running again...