Search results

No I haven't gotten a chance to look at the model, sorry I work to much it's got a valve made up of 6 sections it's a 2004 model year tractor Sent from my XT1080 using Tapatalk

Yes everything but the right outrigger began working correctly after I removed the quick connects and blew air thru them to check for restrictions I left them disconnected in case the outrigger went down again. Everything else has worked good since. I didn't try digging or working with it moved...

Yes it dropped while moving lifting the machine and stopping it I now got it to go up after working lever back and forth but the lever still doesn't have full travel the ram doesn't appear to be bent I I was going very slowly when it happened I got it out of the woods I think there is a foreign...

It is a subframe mounted backhoe OEM made it does not have a PTO operated pump the fluid level is good and was changed less than 10 hours ago there are no leaks or indications of a damaged hose, I will check the model later as the machine is stuck Sent from my XT1080 using Tapatalk

Removed cover and checked linkage it is all ok, removed quick connects to check for a flow problem with them they are ok, reassembled and tried it, got all functions back but the right side outrigger it is still stiff, maybe there is an obstruction in the valve return spring cap could that cause...

Right side outrigger went down on its own while driving thru the woods lifting rear of tractor and stopping it try to raise it and the control lever will not move also lost all other functions on the backhoe it will only twitch sometimes and levers are stiff also front end loader works good...

Hydraulic fluid and filter are changed once a year since I have owned it.I will change it this weekend and check the other things that you mentioned. Thanks.

654 hours it is a 2005

L3400 having trouble with the front end loader. It will only lift when the stick is pulled about half way back if pulled all the way back it doesn't move at all. When lowering bucket it will only lower in float position all the way forward. Bucket tilt works ok.I can not apply any down pressure...