Search results

Thanks for the dialogue. When I lift the 3 pt up the linkage moves. When the tractor is running and I am using the loader, while moving the 3 pt lever, I notice no change in the loader nor do I hear any sound like the 3 pt is attempting to work.

It is connected.

The arms are down. FEL?

Yesterday, I went to a friends house to look at his L245DT. He has the same tractor that I have. My loader is set up the same as his and yet my hydraulics, in the rear (3-pt), don't work work. Could this be the relief valve? Is there something internally that could be causing the issue.

I forgot to tell you that I replaced the filter for the gear oil. It is located below the relief valve on the left side of the rear-end. I replaced the gear oil with the universal oil that the local Kubota dealer recommended.

I am quite sure that there is just the one hydraulic pump (up by the injection pump). The loader is fed fluid from the relief valve that is to the left and under the drivers seat.

I have tried doing this. Doing this didn't change anything. Something else is wrong. Could the relief valve be the issue? Something internal?

A friend of mine and I bought a L245DT. We paid $500 each for the tractor, loader, and a box scraper. It had been sitting outside for a few years and needed a good amount of work and TLC. Another friend had the time and he got the engine going. I recently changed out the universal Trans/Hyd...

I hope that this is ok but I need to locate two new lift arms for my L245DT 3-pt. I bought this tractor and these need to be replaced. (These are the rods that connect the hydraulic lift arm to the draft arm. One is static and the other adjustable). I prefer used or aftermarket. Kubota...