Search results

Got the brackets

I know this is an old tread but does anyone have a operator's manual for the TG1860G? Also i am having the same issue with the deck as the previous owner took the deck off without lowering it.Is there anything on the front of the deck or does it just sit on the rollers on the ground?

Well after all was ready for a try to see what would happen the PTO for the John Deer was too short by about 4 inches.It was ok for the mower because it slides under the front of the tractor.Is there a way to attach an adapter of some sort to the 1 inch keyed shaft to make it longer?I also see...

Well I finally got back to working on the snowblower.Bought a 12 tooth and a 32 tooth sprocket for the main.Decided to forget about the idlers because i have no idea why I need them.Hooked the chain up to the 2 sprockets.Turned it by hand and it appears that the fan shaft is bent a bit as it is...

Anyone know what I need with the PTO of 2000 RPM coming from tractor??

but the John Deere pto is 2000 rpm only one setting

Found out more info.Guy who drove this for previous owner said it was used on Kubota F2000 and ran on 1100 PTO rpm.my john deere pto is 2000 rpm and turns counterclockwise and the main gear middle one in picture is CC also. PTO gear has 13 teeth and main gear for impeller has 18 teeth. not sure...

good question!! The other 2 gears are just idlers.I am not even sure how the chain is routed.I bought the old blower to try and fit it on an F910 John Deere front mower I have.The John Deere has a 2000 Rpm PTO(only one setting).Guy on another site I tried to get help on says to forget the...

here it is .Are those gears and chain( not attached) to reduce PTO speed .He said it was purchased new like this.

Hi could someone tell me what an old B2551 front mount snowblower PTO rpm should be.it was on a F2000 Kubota.Guy who knew the previous owner said it had 2 speeds 1100 and 2500 and they ran the blower on the 1100RPM setting and the mowing deck on 2500 RPM setting