Search results

If you understand that I have spent most of the week trying multiple things to get it running, only to frustratingly fail, you will understand this response.......YOU NAILED IT!!!! THANK YOU, THANK YOU. THANK YOU!!!! It was a pesky 5 amp fuse labeled KEY STOP. I thank you very much. Now my...

Yes dash light on. Headlights on. Turn key and no noise. Battery was fine when engine shut down.

Still digging for a solution, will check. Thanks.

Put a new seat safety switch on. No progress. Tried moving levers and pedal. No luck. Is the switch at the pedal (Grease zerk) visible? Can't seem to find it. Thanks for what you've suggested. Still fiddling.

A lot of great ideas. Will work on them in the AM and let you know. Thanks

Triple checked. Only only have one for the seat. Was hoping, thanks anyway.

Ok, thanks, will look harder.

So here's the short story. I tripped getting up on to my running B7800 HST, fell onto seat, hard, and hit the reverse pedal. Tractor died and won't crank. Checked seat switch. Ran the shifting/PTO levers through their steps. Cycled the forward and reverse pedals. As of today, I used the truck...

Problem has been solved. Turns out to be a seat safety switch. Switch bracket was just a little off kilter. Realigned the bracket and that raskel runs like new.

YOU NAILED IT!! Thank you!!

Ok thanks.

Previously posted on reply line to other user simular problem. B7800 starts and idles fine. But, when I attempt to excellerate it dies or almost dies. I will attempt to attach a video to this post to help explain. I have checked the fuel flow, vacuumed the fuel tank, and cleaned the air...

It moves forward forward, then attempts to stall. If you let off the "gas" pedal, it almost backfires. Then runs. Sequence is, press gas pedal, it moves forward, starts to stall/shut down, you let off Gas engine resumes rpm and you repeat. Run almost stall...run almost stall...run almost...

Okay. Thanks!

Will do thanks

Will do thanks.

I'll have to look at that. It does have safety switches. But both my Wife and I get the same "action" and we are two totally different body styles. Thank you.

My B7800 idles fine. When going forward or reverse it Stalls. Even at 2500 rpm. Fuel filter new. No change.