Search results

Thanks appreciate your help. I am doing the fuel system now, changing the filters, blowing air back into the tank for 10 minutes then polishing the fuel for 20 minutes with a separate filter and pump system I built. That should have everything back up to par. I will get the gauge and quick...

So far I have reached the point where I have completed all the suggestions including swapped the lines going to the FEL and the lift function still will not lift the tractor. I am wondering if the tractor hydraulic function is not generating enough pressure that all drive and mow functions all...

No the tractor is standard. So far I have reached the point where I have completed all the suggestions including swapped the lines going to the FEL and the lift function still will not lift the tractor. I am wondering if the tractor hydraulic function is not generating enough pressure that all...

OK, how do you get to the valve body it self? I took off the cover for the control lever and all the movement looked good, not too loose and no real play. I activated all functions and everything looked good. Next following the levers I could not see the valve body under the tractor so I...

I always test the FEL with the Brush hog on the ground. When I first noticed the problem I was cutting grass, so I shut the mower off and lowred the bush hog to the ground. Problem still there.

I did that first. None of the FEL lines re loose, or leaking, nor are the cylinders. Then I dumped the transmission oil (Tractor supply transmission oil for small tractors hydrostatic drives) replaced the filter with the Kubota filter and cleaned al the screens, bypass valves and regulators...

Thanks that seems like an easy first step

I have a BX 25 and it runs well, but starting two weeks ago the lift capacity of the FEL has gone to almost nothing. Since it is about time I dumped the hydraulic oil, new filter and new oil, cleaned the filter screen, cleaned and inspected the pressure relief, and valve body in the...