Search results

I think I'm looking at under $500. Will find out soon. Best of luck to you my friend.

Thanks again for the responses guys. I am pretty certain the snap ring not being installed properly was indeed the culprit and whats left of it is the metal flakes I found. And I definitely will be replacing the bearings that the cone slides into. Thanks for the link to properly installing the...

And I'm not sure why but the photo is sideways. The right side is actually the bottom.

Also...I am going to the dealer tomorrow with all the parts. They should be able to tell me if the bearings are ok. I did find a work receipt in my owners manual from December 2017 where the dealer replaced both front oil seals.

Thanks guys. After looking at the parts diagram there are two missing items. One is the upper c-clip and the shim that goes just above it. This is the clip that holds the entire knuckle against the bevel housing that is bolted to the end of the axle housing. I am assuming these items are the...

Hi folks. Haven't been on here since January but need some advice. I noticed the left front on my 2004 L3830 was leaking oil where the steering knuckle turns left or right on the axel assembly. I checked the axel oil and since it wasn't low continued using it. Then I noticed when I raised the...

Thank you again guys. I got the tractor and the backhoe is a BH92. Now I’m looking forward to learning this machine!

Thank you. Anxious to find out which one it is.

Hello all! I am new to tractor ownership (at least bigger than an 18hp lawn tractor) and this forum. I just put a down payment at a local dealership on a 2004 4x4 L3830DT with a Kubota backhoe and 1770 hours. They had sold this machine new to a private gentleman who traded it in. My questions...