Search results

The problem stems all from hydraulic relations yes 3ph doesnt lift but the two are connected focusing just on the 3ph is the same issue as focusing on loader not lifting or power steering its all hydraulic driven so its control valve related for whatever reason its not building pressure. pump...

No significant change in sound from initial startup when moving lever however there is a whining noise when running at the lower rpms but cant exactly pin point what it is. Once going up on rpms the engine either over powers sound or it phases out at the higher rpm. Loader also started having...

Are you refering to the loader hose ? If so yes its looped to its proper fitting

3ph moves in conjunction with mower base so 3ph doesnt move then mower deck doesnt. The two are linked 3ph isnt moving aswell as mower deck. Ive tried adjusting the hydraulic control lever that should help for releasing and allowing smooth down transitions and it will turn and lock both ways and...

Oil and filter have both been changed and also just recently dumped and checked screen then refilled. No signs of hydrualic oil issues.

The hydraulics would act up off and on while in use. Little messing around with the raise and lower lever it would come back. But eventually just gave out all together after several months of random off and ons. That control valve cant be wrong since when removing pump only two bolts mount it to...

So i found some oring material/washer to link it off with and no longer lose hydraulic fluid but still not deck function. Took hydraulic control valve assembly apart and put it back together after cleaning and still had no luck getting the mower deck to raise up or down. Also flushed lines using...

Looking at both they are identical. Measured length and they measure the same. bolt patterns are identical and shaft sizes are identical absolutely no differences that i can see.

Had an issue with hydraulic pressure and bought a new pump and installed it. I now have a gap between the pressure control valve and the housing. Am i missing something looking at parts breakdowns i cant see what should fit between but its impossible to push the two together, tried rebolting and...