Search results

I have the same question about PTO shaft length. Don't have a QH yet and I'm hesitant to trim a PTO shaft for a chipper before I get it.

Cool, thanks!

Thanks--that should work. Al

I'd say 14 - 18" between the pin holes.

I've looked through a lot of threads to find a source for a side link tilt cylinder for the LX2610, other than Fitrite. I would love to have one from Brian but the current wait time is 36 weeks....9 months! Can anyone point me in the right direction of another source for a short cylinder with...

Hi, Henro. Saw a pic of your top and tilt cylinders....can you share the source for the side tilt cylinder please? Thanks! Al

Greg, if I remember correctly it took a couple of hours, taking my time. The cab probably made it take longer. I think the parts were around $1,500. My dealer quote was like yours so I did the install myself.

Bill, do you know if the "250" is its capacity in pounds or kilos? I'm looking at a very similar one made by Rankin, a PL-500 (500 lbs). The pic of yours on your tractor shows it to be quite large; if it's a 250-pound model it might be the right size for me and not the 500. Mine will be used...

I went with the factory setup and could not be happier (except for the price). I've put many "kits" on many different things over the years and I have to say this is probably the most robust, complete kit ever. Each part is solid and all the needed parts are included. I put on one valve block...

I'm only looking at buying the remote parts from the dealer...agree I shouldn't have to pay freight. I included the rest of the quote just for context. I'll get the cylinders from elsewhere and do the labor myself. Thanks

Thanks for that. I also thought that the on/off of a solenoid valve would be less than ideal. I just don't know if the 4 parts quoted by the dealer includes the remotes themselves/brackets/fittings/hoses/etc. I asked the dealer; awaiting reply.

Yes, outrageous but those are the exact prices you see on the "build my Kubota" website. I will do the install myself so I'd have to add tax and shipping.

Good info; thanks!

Ah. I'd look for the diagram but I'm not near the tractor now. I imagine after I got the aftermarket valve and all the fittings and hoses and remote block/fittings I'd be near $1,000. The Kubota parts and shipping are about $1,600. Ugh, I might just go with the Kubota/LP setup and install it...

Thanks! That's what I thought. Just getting used to the terminology....pb return makes sense.

Thanks! Very interesting how that valve block is mounted. I wonder if it's compatible with the 3rd function valve.

Definitely nice! Thanks for the pic. Here is the quote I received: B7316 BASE KIT/1ST LEVER KIT $522.00, HAVE TO ORDER. B7317 2ND POSITION/2ND LEVER KIT $285.00, HAVE TO ORDER. B7304 DOUBLE ACTING VALVE FOR 1ST REMOTE. $251.00 HAVE TO ORDER B7305 FLOAT DETENT VALVE FOR 2ND REMOTE, $316.00...

Hmmm.....I have another pic from a slightly higher angle but no diagram. I also just checked my folder for a manual on the 3FV but nothing is there. So you are saying the shiny hard line is pressure, and not return? I'll see if I can find out if the 3FV is open/tandem. Also have a pic of the...

Need hydro advice on adding 2 sets of rear remotes to a cab model LX, please. New to tractors and didn't think I'd need them when ordering the machine. Got a box blade and only recently discovered "top 'n tilt" and of course I gotta have that now. Priced parts from Kubota and they're crazy...

Please help me identify model numbers for my new (to me) B7100 loader and tiller. Can modern UDT be used in the loader? UDT or gear oil in the tiller? Thanks!