Search results

Correct as stated by member posts, my problem was a failed coupler on the bulkhead bracket. Of the four couplers it was the white or port A, male tip. Thank you all for your help and patience as I muddled my way the trouble shooting terminology.

Thank you for the advise. Sorry, if my follow up questions will be too basic. The loader has four quick disconnect couplers on the tractor right hand side. These are color coded Wh, Bl, Rd, Yl for ports A-D. These are the connections I have been swapping around. Are you referring to these...

Correct, I have done exactly that. Float position and tried to lift with a floor jack. Subsequently I have been able operate the loader up/down by swapping the loader hydraulic connections. This seems a contradiction but that is what happened. I will this again though.

I do not know how to verify if the spool that operates my loader (boom) is moving. I can check to see if I have cable operated controls if told what to look for. I can call the dealer to ask tomorrow as well. I did confirm there was a strong steady flow on each arm cylinder on the loader. By...

I swapped the hose connections as recommended from another post. The loader will now lift (Up/Down), but I lost the tilt (R/L) function. I previously had put the loader valve in float and tried to lift the loader with a floor jack. The loader arm would not raise independently.

Thank you for the response, I disconnected the grapple, no change. The loader when activated U/D will move or respond 1/2" either way. I disconnected the cylinder hoses #30/80. There is a strong flow moving the control lever "down". I checked the other side as well #60/90. There is a strong...

Hello, I have a Kubota B2650, LA534 loader, and a Claw Grapple SGC0554 attached. My 3- point hitch (Up/down) operates. The attached grapple (open/close) operates. The loader tilt (L/R) operates. However, the loader up/down) does not. I have cleaned and rechecked the hydraulic hose...