Search results

I purchased a GCK60-26BX with my Kubota and it has hardly ever been used. Looking to get it out of the garage. Originally purchased for $2K new. Made a dolly for it. You can see the condition here (love how when you search for this part my video is the first google result!)...

We will definitely want to end up at a place where a small tractor would be needed for snow removal. There is a possibility we would end up at a place where a B series would be better than a BX, but that is completely unknown at this point. The townhouse we are looking to rent would have...

I am having to move for a new job, and will be in an apartment until the right house is available at the new location. I just got a tractor setup 2 years ago. It is a Kubota BX2370 with loader, MMM, grass catcher, and snow blower. I also have a land pride 50" tiller for the 3 point. All the...

Hello everyone. I had a shear pin break on my snowblower impeller, and the shear pins that my Kubota dealer sold me are not the right ones! If anyone has a BX5450, can you upload a picture of where the shear pin is for the impeller so I can see what the installed bolt is supposed to look like...

This is the one I have been using from Amazon. https://www.amazon.com/gp/product/B00M1X6F9Y/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 $65 with free shipping. I really like the way this one is constructed, it seems like it would be much more robust then some of the others I have seen. John...

Thanks for the suggestion of the set screws. I loosened them up, then used a rubber mallet on a wood block to knock the end back into place. Now I have about an 1/8" gap on both ends, with nothing around the center gear box. Final pictures attached. Thanks, John Vickers

Hey everyone. I have a potential problem with my snowblower that I wanted to see if any of you know anything about. I don't see any obvious bends in the blower, but the right side auger has a gap in the axle between the auger and the housing. I have attached a pic of the left and right side...

Re: Impliments for my Kubota BX2370 and how I store them Mike, My tractor came with the second adjustable arm because I purchased the bagger. The bagger has static mounts that get bolted to the back of the tractor, and they require shorter arms than the 3-point hitch. So for the bagger, you...

Les, I have attached some photos with a tape measure so you can see relative size. As I said I threw these together without plans, literally cutting pieces without a tape measure and screwing it together where I thought would work. If you want to try to make something more exact, I would round...

I didn't have plans for them, just kind of built what felt right. Which dolly are you interested in? I will take some measurements and pictures to help you build your own. John Vickers

Now that winter is coming to a close, I needed to switch from the Snowblower to the FEL. Took some videos of the switch that showcases the dollies I made for the implements. Snowblower can be seen here: https://youtu.be/0dKyLecngbI FEL can be seen here: https://youtu.be/ME060NAF_vw Let me...

Got a bit more snow yesterday to exercise the snow blower. You can check it out here: https://youtu.be/QXQQUTiZx6g John Vickers

The clear plastic is what came with my bagger. I suspect that is one of the changes they made to the later models to let you see if the shoot is clogged up. John Vickers

Interesting way to extend remote controls like that. If you hold them up to your head (or even a 1 gallon jug of water if you don't want RF going through your brain) it will extend the range. I know it sounds crazy, but I have tried it and it works. Your body can act as a natural antenna for RF...

The FEL has mostly been for moving things around (Firewood mostly) which doesn't really ding it up. Just have to sweep out the bark before putting it away. I have used it to haul some bigger things around using ratchet straps (another $5 special at Harbor Freight) and the hooks on them hold...

Up next, the MMM. This is the finish mower from Kubota, model RCK54P23BX. This one was a bit more of a challenge. I wanted it to be easy to roll around the garage. I didn't want to leave it flat (since it takes up a lot of space), but storing it completely vertical would have been very top heavy...

Next up is the tiller. Purchased from Land Pride, model RTA1250. This thing made a huge difference in the soil quality in our garden this year. Got out a ton of rocks that had been about 6" under ground. I just couldn't get that deep with a walk behind tiller. The attached pic of the new rock...

The Kubota bagger for the BX series is the only implement so far that I have not been impressed with the design for attach/detach. All of the other implements work really well for quick attach/detach, not so with the bagger. Since the bagger requires the 3 point lower arms be attached to static...

For the FEL, I have the stock one that comes with the BX2370 (the LA243). I made a dolly for it using three movers dollies from Harber Freight on sale ($8 each). I used some spare 1x4 and 2x4 material to strap them together and make a catch bar for the feet to sit on. I use the lip of the...

The trailer hitch attachment shown in the pictures above is one from Titan Attachments, ordered from Amazon here: http://www.amazon.com/gp/product/B00M1X6F9Y?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s02 They could have done a better job shipping it, but it came in undamaged with all the...