Search results

And I thought I was a Cowboy :p

I’m in sandy soil and I’m having issues with dadgum gophers and pigs. I was going to build a drag (10’) out of I beam ( 5’ in front attached to a 10’ on the rear) but I’m hearing that a tandem split pipe should suit my needs better. I do treat ( kill ) gophers with my gopher plow but the last...

So just to let anyone else know , the L6060 Will lift a 2K lb pallet of corn or whatever easily, ! Yes , you have to have ballast and it’s Always important to keep the load as low as possible but it will do it safely ! There, the question has Finally been answered 😉

It’s been a while but this is the grapple I ended up purchasing!Yes, it is designed with double clamps and I definitely would not own a single after using this bad boy. Yes, it is designed to use the grapples in fully open position as a debris rake due to the stops . I have put this grapple...

I’m 225 myself - this seat is definitely going to bottom out and if you have back problems it isn’t going to be good! As far as grammar just go to their site, contact them and they will ask every question you need for fitment! Like I said, I purchased the darned thing, pulled my suspension seat...

these seats are rougher than my factory L6060 suspension seat ! I purchased one even after reading that on this site, installed it and it wasn’t good to say the least , I removed it after a half days use and went back to the factory suspension seat! These “air ride” seats will bottom out even if...

I built a shroud around minebut I do agree. Easier access vs open to easy damages!

We did but I have ADD lol!

Well Men, with a shortage of mechanics at our local bota dealer I don’t want to take it in there to possible sit for a month or two! It is under warranty and will be for 4.5 more years. If the valving is bad , it will show it’s ugly face so I will have to cross that bridge when I come to it! I...

Lol Dan- it will be OK buddy 🙂 . So I’ve probably not explained it correctly - follow the lines from the quick connects at the front of the loader , back to the connections by the cab ( where you disconnect the 4 quick connects for the loader it’s self and then there are 2 more for the 3rd...

i ended up swapping the two lines at the loader valve and that fixed the issue! I’m up and going now 👍🏼 i appreciate everyone’s help so much!

Yes Sir!

Well, I put an American made fitting on and though it connects better that isn’t the problem ! It’s got to be from the loader connects back to the valve body - I’m pretty sure it’s in the valve body !

Well, I “ think” that I found the culprit! The female coupler on the tractor seemed sticky when I first connected the hose from the grapple to it. I pulled that rascal off and it is frozen with no movement in the spring collar 😡! Piece of junk Chinese made - oh well, I guess y’all get my point...

On it! Thanks again

Zero pressure when closing/ clamping! Yes Sir, male and female ! I am concerned with it doing the exact opposite when switching connectors though! It may be back in the valve body .. dagnabit! Easy things first so I’ll switch the fittings ! Thanks Wick

I checked it and the grapples will push a big brush pile with heavy tree’s in it ! Tilted about 5 degree’s forward , fully closed then extending them !

I see! I’ll try it in the morning👍🏼

Yes Sir, they open quickly!I would say that they open as they should !

I’ve had my tractor for 5 months but had the 3rd function to the FEL installed upon purchase. I finally received my grapple today after a lengthy wait , connected it to my tractor, connected the flat faced fittings and tried to put it to work. This a double grapple root rake .the grapples opened...