Search results

The BX is a pretty small tractor and does not have a lot of lift on the 3PH. For example, on my BX2200 I could not lift my 6' landscape rake enough to swing it around. End hit the ground. I was able to drill new holes higher in the lift rod forked ends, to increase the 3PH lift enough to swing...

I figured the OP was more like me and would be taking a couple/few days to produce results... :ROFLMAO:

You need to bleed the system of air if you run a tractor that old out of fuel. Some newer models self bleed, but probably not yours. I have read you should loosen the nuts on the fuel lines at the injectors, NOT at the pump. Someone else that is more familiar with the procedure will chime in I...

Even better than a grapple on a loader if you have to carry the log down a trail...with trees on each side... Edit: But I think this is actually an on-topic post...

It would be great if those using a PHD on a BX could give some input on how well it works for them. I am fortunate to have a BX and a B series. I use my PHD on my B2910, which has a foot clutch, which I find extremely useful with the PHD. So much so that I would probably not enjoy using a PHD...

Well, because I got sucked into reading the thread by a meaningless thread title I guess. But mostly because I thought if you posted your question with more detail you could get better help. Second, there are A LOT of videos On YouTube. Common courtesy to post a link if you expect people to...

With our clay a wider bucket is better. For your soil type either should work fine. BUT extra width of a trench can be desirable sometimes. I rarely use the 10 inch bucket I have, and keep the 16” on all the time. Our soil makes the 10” a nightmare to use if at all damp. Bucket sticks half full...

Do not see the extra HP adding anything to the backhoe. Extra speed of the backhoe would require more hydraulic flow. More power from the backhoe would require higher hydraulic pressure. Seems increased engine HP would provide neither...more flow possibly if you also increased max engine RPM at...

LMAO! We must be of the same vintage! :ROFLMAO:

I hope the OP does check back and see/download that schematic. Nothing beats have the EXACT info when troubleshooting a problem!

Well, I just got to ask. Would you be willing to trade your life today for what people endured during the 1920s? I mean the normal person, not the wealthy few. Investigate health care options, employment options, quality of life, and so on. I know I would not go back...

Figures don't lie... ...But liars figure

That is probably because you are one of the smart ones! Dummies like me always over pay and get something back... :oops:

I am in the build "the concrete workbench" group. Cannot help but think if not satisfied with it, it would be a hellava base, and you could cover the top with either 1/8 inch thick steel sheet or plywood, later, without adding much height. I give your idea (y) (y)(y)

I just tried it twice. Came up with a 404 error initially both times, but within a half second the web site appeared and seemed to work normally. If you are on a slow connection, you may have to wait longer than a half second...

Thanks Wolfman. I figured so but it never hurts to ask if there is any doubt...

Not trying to be rude, but you asked the question, and if you want advice you should post pictures, and not just say "Take a look" without even posting a link at what you want people to look at.

Point well taken, but what if you are the third owner of a tractor and decide to sell it. How do you know what labels might have been there to begin with? There must be some limit to this worry...somewhere...

I think so. It is obvious from this diagram that the power to the starter comes directly from start switch terminal 50 to the starter via a connector. So either the switch is bad, or the connector is bad, or a wire is broken...

Just wondering. Last time mine took a long time to come in. But I file my taxes early normally. Do they pay the later filers first? Late filers are smarter, since they probably set things up so they get little or nothing back! Only thing I can figure...my brother does not file taxes since he...