Search results

Thanks for the reply. I should have been more clear to state that the n error code comes when the clutch is engaging with a lurch so Im assuming they are related.

I have an M-120 with about 5000hrs. The clutch has been quite aggressive and jumpy for a little while. Just the other day it started to error code with an "n" flashing in display with 3 beeps. This goes away when both forward/reverse shuttle and range selector are placed in neutral. It doesnt...

Did you figure it out? Mine is doing the same thing. My mechanic says it must have another vent that is plugged but I can't find it.

Does anyone know where the transmission housing breather is on an M120? I've looked but can't find it. The tractor is putting oil out the breather line that goes to the front axle housing so I'm thinking the transmission breather must be plugged? Any thoughts? Thanks

They are computer controlled based on temp and it is currently working. Yes I had 2 out and neither would heat. The resistance on all is in the hundreds of M ohms. spec is .95ohms

I have a 2009 M135X. I discovered that all 4 glowplugs are "dead". does anyone have an idea why this would have happened? I do not want to put 4 new ones in (150 apiece i think) to havr it happen again. I could accept 1 being gone but not all 4 at once. My dealer is pretty much useless. Thanks