Search results

M 7040 with dual remote outlets....don`t forget to add the a/c cab :d

I put all my implements on seperate wood pallets, I make sure the pallet is on decent level ground same as tractor. I generaly position my FEL to level and tilt down a little. When you approach the implement you will be able to tell if you are too far over to one side or the other because you...

My new to me John Deere MX10 pull type bushhog is too big to paint !! lol

Call me Krazy but I wash and wax my tractor and vacuum the inside, wipe the windows and armorall the interior. All While listening to my radio I might add. I am also thinking of putting window tint in the cab windows. Looking for the fur dice now !!! I also pressure wash my implements top and...

5 horsepower per foot of cutter is what my Kubota dealer uses as rule of thumb on implements.....I don`t see that 5` finisher bogging down your tractor that much. Is the tractor blowing smoke ? tranny in four low ? Does it bog your tractor down by just engaging the pto and mower lifted not...

here in South Louisiana I broadcast my rye grass seed and then do a medium height bushhog cut. It shakes the seed to the ground and covers with dying grass ...Holds the moisture really nice. Makes for a nice stand of rye grass.

While looking at the front of my new M7040 I noticed the FEL bucket is not level compared to the front grill on the tractor. I have not dug much dirt with it as of yet so its hard to tell if it is digging deeper on one side. I have checked the tire pressure in the rear tires and have set the the...

Glad no one was hurt. I have this same blade , bearing cover and bolt on my Kubota zero turn, just on a smaller scale. I never have thought of torquing the blade bolt but I never thought I`d see a bolt sheared either. I would think this happened from over torquing.

Thanks for the info....If I would have brought all my new tractor manuals to work with me I would have seen that :)

Hate to hear that WFM, I just purchased a new M7040 and it has the new QC on my FEL. I am a little concerned about back dragging my bucket , I don`t see enough iron to maybe prevent this from happening to me. I have already bent one of my forks down 6 inches due to the fork digging in the dirt...

was wondering this myself, nowhere on the spec sheet of the FEL does it show the weight. Is is already added the tractor weight ?

1 foot per every 5 horses of pto power.

I built one just like it except for the receiver hitch, welded reinforced tab to mount ball on to keep weight closer to the tractor....I learned one thing, when pulling a brand new gooseneck stock trailer on the top gooseneck ball, please beware of uneven ground like dips or small ditch because...

How well does it match the tractor ? I`m thinking of painting my newly purchased John Deere MX-10 cutter....That will get the people talking !!! :)

After pricing a Kubota factory radio from 2 different dealers, it was recommended I use the audio shop favored by the second dealer because this audio shop actually installed aftermarket radios in all his tractors. I took his advice and purchased the Kenwood model#KDC-255U for $130 tax,title &...