Search results

Thanks Wolfman once again, always reassuring to know in advance. Now my mate took the top off and was able to free the gear and shifter up so that it now operates as it should. Do you know of any rectification work that can be done to prevent this from happening again as it seems to be a common...

Hi Wolfman, If I pull the top off the box is there anything that I should look out for, anything that might drop down inside the box?

Thanks Wolfman, being only day 2 of this year and I was beginning to think it was going to be a painful year, We will pull the top off and have a look and see how bad it is, I hope it is a selector issue

Ok now Houston has a problem, my mates tractor is stuck in gear somehow. Gearshift in neutral, start tractor with clutch in, let clutch out and tractor is in reverse. He can shift it into 4th gear and it will drive forward, High and low engage no problem. Only gear he can select is 4th, and take...

So this has got me thinking again, if it doesn't have live hydraulics then how does the bucket raise and lower, does it only have lift on the up and rely on gravity to tip the bucket? Not being near the machine makes it hard for me to work out Cheers Norm

Thanks Bill I would say you are right there, I didn't see a pump or tank and I did see the loader lines appearing to run towards the rear. If this is the case then it does not have live hydraulics on the loader either, hydraulic lift but you only open the valve to lower the bucket? This hits on...

Excellent info once again, very much appreciated, obviously the vent hole is blocked. Every photo brings up another question and the one looking atr the control adjuster with F and S on it I think controls the lift/lower rate on the hydraulics, correct? The 3 point linkage is obviously not live...

Thanks Bill, much appreciated, I have passed it on to my mates daughter up the bush, so she can show him to make sure it is right before she prints it off for him. Should make him happy. Another problem he just mentioned is that there is an oil leak on top of the gearbox, coming from the plate...

I'm also looking for a manual for a mate of mine who has had his L1500 for about 6 months now and he keeps asking me questions about it that I can't answer.

New here so take it easy on me, hope this is in the right section. A mate of mine bought an L1500 about 6 months ago and he is wanting to get his hands on a manual for this machine. I grew up on Ferguson tractors as a kid so I have a rough idea of my way around tractors, but he keeps asking me...