Search results

  1. Firefighter71913

    L4701 Engine code P0118

    Update for anyone interested: I appreciate all of the help and advice from everyone! After following all of the advice and checking everything that was recommended, I still couldn’t find any obvious issues. With the history of the same issue on the tractor, I contacted my dealerships service...
  2. Firefighter71913

    L4701 Engine code P0118

    So I traced the wires the best that I could, all the way back to the cowl/dash cover, without taking it off (I didn’t have time to do that tonight) and none of the wire are chafed or shorted. Using my multimeter, I also checked the voltage at the harness connector and with the key on, it’s...
  3. Firefighter71913

    L4701 Engine code P0118

    It’s definitely not hot on initial start up….and it’s never gotten “too hot”.
  4. Firefighter71913

    L4701 Engine code P0118

    It throws the code on start up.
  5. Firefighter71913

    L4701 Engine code P0118

    I have a 2018 L4701 with approximately 400 hrs on it. It first threw this P0118 code, with less than a months worth of work on the machine. I looked into it and everything that I can find is that it’s related to the engine coolant temp sensor, which makes sense bc the temp gauge on the dash...
  6. Firefighter71913

    Help!

    Yes. 100% positive….
  7. Firefighter71913

    Help!

    The exhaust smells a lot like it does during, or right before the regen light comes on. Could it be an issue with the DPF? I thought about doing a forced regen, but it’s running super rough at anything over 1200-1500 RPM and I didn’t want to do anymore damage that might already be done.
  8. Firefighter71913

    Help!

    No error codes appear . No error codes w on the display.
  9. Firefighter71913

    Help!

    I have a 2018 Kubota L4701 with approx 350 hrs. It gets used to some extent, every couple of days. I put 10 gallons of fresh diesel in it yesterday and started turning over the garden spot. After about an hr, it just died….like it ran out of gas. I cleaned and drained the water separator (it...