Search results

That makes sense but I'm not sure why I didn't have issues before. In the 3 point assembly, there's 2 nuts on shaft #7 as illustrated and I did take that apart but didn't know how to properly adjust it. Maybe that's part of my problem? I don't see anything in the shop manual? Thanks for your help.

I plan on getting a pressure gauge. I was thinking maybe one of the relief valves in the 3 point might be messed up. I did notice the engine speed change when the 3 point is fully raised. Sounds like the pump is pressurizing and causing the engine to reduce speed??

Yes I have return lines. Loader ran great for 3 years. Everything started after I replaced the o rings in the 3 point assembly valve.

It's not leaking there. It blows out from under the piston cap causing me to loose most of my fluid. Makes one hell of a mess.

I mounted a John Deer loader with a Hydro Works two spool joystick FEL. Worked great for 3 years but I developed a leak from my 3 point lever. After changing the O Rings, I started having this problem. I was suspecting what you are saying, that it was dead heading on top of the piston. Would a...

Twice I've had hydraulic oil blow out from under the 3 point piston cap. Seems to happen when I have my 3 point in the UP position while using the front end loader. I've recently replaced the Orings inside the 3 point control valve but did not touch the release valve or poppets. What could be...

Hello and thanks for allowing me to join this site. I Just finished fabricating my loader mount for my B7200D manual shift 4x4. I picked up a JD model 40 loader and customized the mounts to fit the loader. I purchased a two spool FEL valve with power beyond. This tractor has a flow valve with...