Search results

Thank you for the quick reply, I'll check what you have suggested and post another reply The shim fits over the two ball bearings on the upper centre shaft very neatly, I can slip it over these bearings but I can't see that it would have any effect on the shaft end play, is this the place...

Hello, I have a 1983 B7100, I am replacing the FWD shaft inside the gearbox as it has suffered a bit of a catastrophe, I'll post the story when it is fixed. After the gearbox was lifted out I found a shim on the floor that must have come from the gearbox. Would anyone be able to tell me where it...

Hello from NZ, I have some questions please on my 1983 B7100: where can I find information on how to remove the FWD output shaft in the transmission case any suggestions on where to find a replacement shaft, Messick's will not ship outside of the US, only to a US address which of course I don't...

The output shaft needs replacement I think as it looks as though the end is missing, I have the gearbox cover off, I need to work out how to get the shaft out, should be a hair raiser, I've never worked on gearbox before! Cheers, airheadrob

Hello, I have a circa 1983 B7100 in (bought recently in NZ) which has no front wheel drive. I investigated and found the UJ missing and the output shaft chewed up. I have split the tractor and have attached a photo of the transmission output, two things: Where can I get parts from (preferably in...

I posted on this a week ago but the details/photos were not very good so here goes again. I have a 1983 B7100, recently bought (in NZ) when I checked underneath I can see two exposed splines, one to the transmission and one from the FWD diff and the main drive connection. The tans spline is...

I have recently bought a B7100. On taking a look underneath I saw that the front wheel drive shaft was not connected with the gearbox shaft having a snarly looking end to it. Can anyone shed some light on what might have happened and how to possibly fix this? I've included a couple of photos...