Search results

FYI they have discontinued the old part (I am assuming they figured out it was a terrible design). Installation Tips Kubota #32741-97902 HOSE,ASSY(SUCTIO $34.31 3 In Stock Product replaces 32741-39112 32741-39150 32741-39160 32741-97900

Follow up for anyone with the same issue. Had the suction boot fail and it causes some WEIRD symptoms. Kubota #32741-39150 HOSE, SUCTION I guess it was causing air pockets in the hydraulic fluid I assume was making a hydraulic lock that that would cause the machine to random run terribly then...

Follow up for anyone with the same issue. Had the boot fail again and it causes some WEIRD symptoms. I guess it was causing air pockets that would cause the machine to random run terribly then inevitably stall and be super hard to restart when hot. I thought it could be an injector pump...

OK, update... compression tested fine. Like I mentioned, it runs fine a lot of the time too. It started acting up today, and I just happened to be moving the backhoe hydraulics and it seems to help. So after some playing around, as it starts to stall and splutter randomly while just driving...

Hey Andy, I am getting almost identical symptoms to you.. stalling after an hour or so use... then the tractor will keep doing it to the point it is useless until the next day. I have tried all the fuel issues I can find.. I have plenty of fuel flow.. I can see the fuel flowing via TWO...

Would compression cause a random intermittent issue like this? It seems if the pistons or valves were bad, it would be a persistent issue, no?

I agree. Hence it was a misting down the intake. Didn't dump it! :) As the tractor runs totally fine a good percent of the time with no weird noises, smoking, etc, I pretty sure I didn't damage the cylinders or valves.

Nope.. I have tried removing the fuel cap altogether when it is crapping out.. there is no pressurization in the fuel tank and obviously removing the cap made no difference.

I did consider the Stop Solenoid. I actually have a volt meter on the stop solenoid to make sure it isn't losing power intermittently. Plus it makes a pretty resilient clunk when the solenoid disengages, so I would hear it. Also when the stalling occurs, it kinda dies slowly over a few seconds...

I did actually talk to the tech department for the cleaner (I wanna say seafoam?) to see if that was OK on a diesel. It is designed for that use. (cleaning injectors/decarbon cylinders) Also, if the injectors / compression were shot, surely it would be consistently flaking out, no?

Hey Wolfman (and everyone!) , I have an ongoing massive PITA issue with a B26 kubota. It runs fine a lot of the time, then will randomly just start chugging and dying, and it will be a bitch to restart.. run for a few minutes or a few seconds or occasionally 30 minutes and then stall and die...

Re: B26 Hydraulics fine, but transmission won't move (much). Update: Success! Machine is up and working like a champ now! In case anyone needs help with this... I looked again at the short rubber hose and can see it split because the hard suction pipe is slightly out of line and puts pressure...

Any recommendations of where to get the filters online with decent prices and shipping?

Thanks Curtis... From what I have been reading, I am looking at the filter also. This machine doesn't have the mesh screen that seems to be an issue on some of the other models, right? So just the HST cartridge filter? Could you take a picture of where you had the cracks on yours? I want to...

Could you elaborate? what would I look for? The linkage is obviously working a bit as it does move a bit. But obviously something is making it super weak. Anyone else got any ideas?

Understood. But as I said, it is still able to move.. just very slowly and very whiney.. so obviously can't be a broken axle. The rest of the hydraulics are still plenty strong. I don't exactly know how the HST works, but would a failed disk cause this weak performance, or would it be...

Hey all, I have a 2015 Kubota B26 that just stopped moving (mostly). It will move a bit.. better forwards than backwards. It is extremely weak in both directions (forwards and back), and makes a very loud whining noise with a lot of vibration. If the reverse stops responding altogether, it...

Hey I have a B26 doing the same thing. I didn't change anything.. it just got worse and worse until now it can barely move forwards or back. Check the hydraulic fluid levels and they are fine. The FEL and BH both work normally. Can anyone help? How did the OP resolve his issue?