Search results

Thanks cbaker65 But I do not see any fuel related on the Wiring Diagram

Well I tested many wires and they all show 12 volts. I will check a few more things today but I get 12 volts across both terminals on the main switch. There are so many things cut or removed it is hard to find where the wires go.

Thanks North Idaho Wolfman I have this diagram but there are a couple of symbols on it that confuse me, like the small arrow pointing towards what looks like a rectangle? There are 3 of them on the generator.

Yes I can jump the terminals on the starter and it turns over but does not start. Yes the battery is charged.

Yes I do have one and I will get at it as soon as I figure out which wires to replace and/or the rectifier.

Thank you Kubotasam. I will have a go at taking the dash of and poke around

Kubotasam, If thing are functioning correctly_______ key off=no light, Key on- engine not running= red light on, key on engine running = no light Yes, key off=no light, key on BUT no light is what I have now!

That is what I did North Idaho and it rolled over.

Kanook...I jumped across both terminal on the starter and it rolled over...but of course did not start.

Shaunblake, your questions do not offend me, I am the one looking for help and appreciate all input. But as I said in the beginning I am not a diesel mechanic. I spent 3o years in the Middle East using satellite imagery to make maps. I have had the tractor for about 6 years and it has always...

Thanks all for the advice. I will take all your suggestions under serious consideration and check the wiring and fuses if I can find them.

Kubotasam No it cannot be the battery because I can jump the starter and it works. But when I tun the ignition switch I get nothing. I am almost sure it hs something to do with the oil, like the sensor but I do not know where to find it. I need a good manual, if you know where I can find one?

Hi all I am new and know nothing about diesel tractors. I guess that leaves everybody breathing hard. I have a B6000 and in the spring when I went to start the tractor I got nothing. Ido have a manual but it is in very simple language, nut, bolt washer etc. and part Japanese which make it very...