L35 with TL720 loader- need tilt bucket cylinder

[Joel35]

part #75582-64010 superseded by part 75582-64110. Looking for a used or new one.

 

[Bee-Positive]

Welcome aboard Joel!! Tough part to find.
Can the old one be rebuilt maybe? If you have it.

Check with Daryl - @Mountainman here on OTT.
Kubota Salvage Yard www.mossycreekoutdoors.com
Mostly B & BX stuff but maybe he knows of other salvage yards that could help.

There's Newhall Tractor Service in California 209-712-4066.

Messick's has a part finder for discontinued parts. You fill out your information and they go looking.

Or you could have one built some place like https://www.hydrauliccylindersinc.com/
Just an example, never used them or if their prices are reasonable.

 

[PoTreeBoy]

@Fluke216 recently bought some L35 parts from someone in PA. You might PM him and see if he can help you.

 

[vcarter]

JOEL35 Did you find one i blew my right side last night bent the ram and blew the end out the threads were total gone don't know how it held together this long.

 

[Bigredmist]

JOEL35 Did you find one i blew my right side last night bent the ram and blew the end out the threads were total gone don't know how it held together this long.

Same issue, sort of. Leaking cylinder but I cannot get the gland nut off. Now I am looking for a cylinder.

 

[L35]

Same issue, sort of. Leaking cylinder but I cannot get the gland nut off. Now I am looking for a cylinder.

Try some heat and a pipe wrench with it still on the machine if it isn’t too late?

 

[Bigredmist]

Try some heat and a pipe wrench with it still on the machine if it isn’t too late?

Thank you for the reply.
I did that and more. The gland nut, "Head", is now badly deformed but likely still usable if I could get it to break loose. Of course, the 75590-13110 “Head” is no longer available which really limits the options. Hydraulic Cylinders Inc. has this direct replacement for $1215. Magister has options that are cheaper by $1K per. I am going to compare the specs on this cylinder today. I will post my results later. Perhaps this may help someone else.

I decided to start a new thread with my results so far. If you find yourself here and want more information on replacement cylinders, follow this link to the new thread.

L35 TL720 Aluminum bucket cylinder head gland stuck! Replacment cylinder thoughts?

Greetings to everyone and thank you for your input! L35 serial number is 60657. The right bucket cylinder is leaking badly. The left has fluid bleeding past the ram seals and Murphy says it too will leak soon. Repairing existing cylinders: I have progressively tried everything to the point...

www.orangetractortalks.com