L285 V1500 Injection pump and 3pt link WANTED

[EastonW1860]

I picked up a L285 non running and it needs a injection pump and 3 point link, lift rod and check chains. The Only place I could find these parts wants $1400 for just the injection pump and 3 point link. (Not including the lift rod and check chains)
The injection pump could be rebuilt for $750 or replaced with a china one for $600. Just looking for a cheaper alternative. (If anyone has a recommendations where I could get one rebuilt for less than $750 that would also be super helpful)


V1500 injection pump 094500-620


3pt arm 34264-71210
lift rod 34264-71540

(not gonna link all the stabilizer parts # but heres a photo)

Not trying to dump a whole bunch of money into this as I'm in highschool and don't have much to throw at this.

 

[North Idaho Wolfman]

The injection pump is going to cost you, they are getting harder and harder to find.
What is wrong with it?
You can but aftermarket links that will work for about $300 for all the parts you need.

Send a PM to @007kubotaguy and see what he might be able to do for you.

 

[EastonW1860]

The injection pump is going to cost you, they are getting harder and harder to find.
What is wrong with it?
You can but aftermarket links that will work for about $300 for all the parts you need.

Send a PM to @007kubotaguy and see what he might be able to do for you.

Wasn't pumping fuel on the rear cylinder, then the barrel started moving when turning over the motor after I pulled the delivery valve to confirm it wasn't the problem. The pin holding the barrel sheared off, I ordered a replacement pin and its incorrect, and I'm not even sure if that'll fix it not pumping fuel. I've never worked on a diesel much less an injection pump.

Here's a video https://www.facebook.com/share/v/16Hib9fUP6y/

(ignore the low compression I had pulled the release)


edit: I'm also unsure what you mean by "you can but aftermarket links that will work for about $300 for all the parts you need." I'm also reading this well half awake lol.

 

[Russell King]

@007kubotaguy has a salvage yard in California that may have those parts you need. Here is the phone number


This place is a good repair shop and may have a rebuilt pump or cheaper repair

Home

Your trusted source for diesel parts & services since 1974. Shop online for injection pumps, injectors, turbos, or visit our Eugene, OR shop for expert repairs & upgrades.

oregonfuelinjection.com

 

[North Idaho Wolfman]

All the three point parts are available here:
They are one of our vendors:

Eparts.shop

Greetings, We are a aftermarket supplier of tractor and side by side parts. We have a wide selection of seats, glass, hydraulic cylinders and seal kits and a lot of other parts. Everything we have is made for us, to meet or exceed OEM specifications. These are direct fit replacement parts. We...

www.orangetractortalks.com

 

[EastonW1860]

All the three point parts are available here:
They are one of our vendors:

Eparts.shop

Greetings, We are a aftermarket supplier of tractor and side by side parts. We have a wide selection of seats, glass, hydraulic cylinders and seal kits and a lot of other parts. Everything we have is made for us, to meet or exceed OEM specifications. These are direct fit replacement parts. We...

www.orangetractortalks.com

I gave them a call and looked on their site. sadly they don't have it.

 

[North Idaho Wolfman]

Give me the length of the lower arm center of pin to center of pin.
Size of ball holes on the ends of the lower arm.
Give me the length of the lift arm pin to pin
Give me the length of the sway link pin to pin

 

[EastonW1860]

29" center pin to center pin
7/8"
20 1/4" pin to pin on the RH adjustable lift link
17 1/2" mounting hole to mounting hole (not sure what position the lower link should be in to measure this as I don't have the RH sway link either)