What did you do to or on your Kubota today?

[PoTreeBoy]

Yesterday, I got out with Katy to spread out the 3' pile of ashes and dirt, getting ready for the next burn if we ever get any rain. Near the bottom were some embers which started smoking, and then a couple had visible flames. This is from burning 3 weeks ago.

Then we carried a few grapple loads, but left them outside the clear area. I don't want any risk of starting another fire until we get some rain.

 

[Bonanza 2026]

about 12 cu yds of dirt / compost into a flower bed. I'm tired. And I didn't tear up the fence or the landscape wall that I built a couple days earlier.

 

[mdhughes]

I used the L3901DT yesterday to move my transfer tank to the garage so I could rebuild the skid that I made for it. As you can see the wood is just a little rotten. I wasn't going to store it outside when I first built it, so I just used the lumber I had. I ended up storing the tank outside.



I used some treated 2"x6" lumber this time. For some reason in the picture it doesn't look treated?



When I got done mounting the tank back on the skid, I used the pressure washer to clean the tank, it was starting to look a little green.

 

[S-G-R]

I gave the hydrulic top link it's first use today with the rear finish mower. A lot quicker to hook up and a lot easier to clean by lifting the rear of the mower up.

I'm kicking myself that I went a year without one.

 

[yyri]

Did some flailing around and sunflowers are starting to bloom

 

[mdhughes]

I gave the hydrulic top link it's first use today with the rear finish mower. A lot quicker to hook up and a lot easier to clean by lifting the rear of the mower up.

I'm kicking myself that I went a year without one.

I just put one on the L3901DT and was surprised that it help as much as it does even with a quick hitch connecting 3pt attachments.

 

[mdhughes]

Put the BH-77 on the L3901DT to do a little digging I needed to do for the lean-to I'm adding to out small poll barn and to remove a stump of a tree i just fell. It took a little while (about an 30 minutes) to get it out, but it finally gave up.

 

[S-G-R]

I just put one on the L3901DT and was surprised that it help as much as it does even with a quick hitch connecting 3pt attachments.

I had one on my LX3310 and never took it off. It's a great investment and time saver in my opinion. Im looking forward to trying out the side link with the rear blade and land plane.