Hi There!! This is my first post bu
I used this forum to solve an issue that I had. I was doing some basic repairs to my B2320 and suddenly it would not start. When the key was put in the start position it did nothing just like one of the safety switches was not set. I checked power to all 4 safety switches (1 at HST pedal, one lever switch at the seat, I have a backhoe so there is not the 2 push button ones, and 2 at the PTO. All swtiches were working fine. I did notice there was not the battery light on the dash when the key switch was turned on. I searched on Google for answers to my problem and found a post with my same issues. There was quite a bit of back and forth with possible causes, but the customer ended up taking it to the dealer. They repaired the issue with the voltage regulator. There are tons of posts on these forum sites and most of them are not the same as our own problem and alot of them do not actually answer the question. This post did match what I had for a problem and the voltage regulator did resolve the issue. Thanks so much for the help
. VTKerl
