Adding temperature sensor & gauge - location?

[timsch]

I'd like to add a temperature gauge to my L275DT. I've already go the gauge and need to install the sensor somewhere. I don't see a good option, unless I replace a radiator hose with an adapter/coupling that has an NPT port on it that I can connect with a couple of shorter sections of hose.

Any recommendations?

 

[85Hokie]

Get this ( correct diameter of course) and make sure you use the ground connection - little screw on backside.

Cut top hose - may need to cut twice to get length correct.

I did this on a B7100 a long while back - works very well

https://www.amazon.com/BAGARAATAN-A...088-b468-965a02f158d1&pd_rd_i=B0B81SN8FM&th=1

 

[North Idaho Wolfman]

That head has a port for the sensor.

 

[timsch]

Thanks so much Hokie. That's just what I had in mind.

But....

Wolfman - you da MAN. I had no idea, but yep, there it was. Extra thanks to you.