BX2380. Block heater v. magnetic heater?

[Blue2Orange]

The old NH being replaced by the Kubota has a block heater. Bit of a need during winter up here in the Northwoods. I need to check with the dealer if there is one installed on the BX. Same dealer I purchased the NH +20 years ago. Block heater was a standard dealer added feature on the tractors they sold back then.

Wondering if not a standard dealer installed accessory anymore how effective those magnetic heaters are? Guessing over the years the cost saving vs. a frost plug model is not a savings if those magnetic units have a short working life.

 

[The Evil Twin]

A heater installed in the block does a better job at what they are supposed to do- heat the cylinders to aid in starting.

 

[85Hokie]

Magnetic heaters were used back when ............ when the oil was very VISCOUS and the pan was made of metal. Heating the oil these days is a waste of time!! Oil is so much better than it was 50 years ago.

Block heating is the way to go - or lower radiator hose will do well too.

 

[North Idaho Wolfman]

There is no room to use a magnetic heater.
Get the dealer to install a block heater.
FYI: I live in a much colder environment than you and I didn't use my block heater on a single piece of equipment all winter.

 

[Blue2Orange]

Thanks for the feedback. Will have the dealer install a block heater if he already has not.
We are officially now ag zone 5a. Trending over the past couple decades is definitely warming and significantly less snow. Just schizo weather. Yesterday, mid 50sF. Digging post holes in shorts and t-shirt. Awoke this AM to temps in the mid 20s with couple inches of fresh snow covering the ground.